Setting System Control; Setting The Ir Transmitter; Setting The Fm Modulator; Setting The Fm Frequency - Alpine PKG-2100P Owner's Manual

Setting System Control

IR transmitter, FM transmitter, FM frequency, dimmer and beep can
be adjusted for all available sources.
• Once this adjustment is made, all sources are affected.
SELECT ENT
1
Press and hold SELECT for at least 2 seconds to
show the SETUP menu on Front Control Keys. Or
Press SETUP button on Remote Control.
2
Press SELECT/SETUP to switch to SYSTEM
setting menu from AUDIO&SCREEN setting menu.
3
s t
Press or to change each item.

Setting the IR Transmitter

4
Press or to select A/B/OFF. (Default: A)

Setting the FM Modulator

4
Press or to select FM Radio region (OFF/USA/
EUR/JPN). (Default: OFF)

Setting the FM Frequency

4
Press or to select desired FM Radio
Frequencies between 88.1 MHz to 92.1 MHz for USA
and Europe, and 88.1 MHz to 90.0 MHz for Japan.
(Default: 89.1 MHz)
• USA frequency step is 0.2MHz and Europe and Japan is
0.1MHz.
20
-EN

Setting the Dimmer

4

Setting the Dimmer Low Level

4
Front Control Keys

Setting the Beep

4

Setting the DVD Auto Play

4
SETUP
Remote Control

Resetting to the Factory Default

4
Press or to select AUTO/LOW/HIGH. (Default:
AUTO)
AUTO adjusts the LCD backlight brightness automatically
by sensing the ambient light from the luminance sensor.
Press or to select low level of Dimmer
between 0 (min.) to 15 (max.). 15 (max.) is the same
brightness level with HIGH on Dimmer menu.
Press or to turn on/off beep sound. (Default:
ON)
Press or to select NORMAL/AUTO/SKIP.
NORMAL: Stay on the menu until the user input.
AUTO: Play movie after 6 seconds on the menu.
SKIP: Play movie Immediately. It will skip
previews and the menu.
• This setting is only available before inserting a disc, or
when in stop mode.
• To activate SKIP mode, a disc must be ejected and reloaded
after setting. (Note: SKIP mode can not be activated, when
a disc is inserted or reloaded while Alpine logo is shown on
the screen monitor.)
• This function is not available on some discs.
Press ENTER Key, the system changes to Factory
Default System Setting. Entire settings include
Picture, Visual EQ, Display Mode are also reset.
DVD Setup values will not be affected.