Alpine DHA-S680P Owner's Manual page 52

Installation and Connections
• Connecting a non Ai-NET compatible Head Unit, Digital Audio
Processor (PXA-H510/PXA-H900) and TV Monitor
DVD Changer
DHA-S680P
Audio Output
Connector
Remote Control Input Lead
(White/Brown)
NOTES
• When using in a system with a head unit that is not Ai-NET compatible and a digital audio processor, only connect the
DHA-S680P and digital audio processor using an optical fiber cable. Do not connect an Ai-NET output cable, or it will
not be possible to control the digital audio processor from the DHA-S680P.
• When connecting only to a digital audio processor (not to a head unit that is not Ai-NET compatible), it is possible to
use both an optical fiber cable and an Ai-NET output cable. In this case the digital audio processor can be controlled
from the DHA-S680P.
• When connecting another brand of TV monitor, there is no need to connect the remote control input cord (white/
brown). Use the remote control sensor unit included with the DHA-S680P.
• Be sure to connect the switched Power Lead (Ignition).
• Also refer to the operating instructions of the other products in the system.
50
-EN
Remote Control
Eye Jack
Digital Output
Terminal (Optical)
Video Output
Connector
Head Unit non-compatible
Ai-NET (Sold Separately)
Remote Out Lead (Blue/White)
RCA Extension Cable
Only when connecting with rear monitor
RCA Extension Cable
Remote Control Output Lead (AUX1)
(White/Brown)
Remote Control Eye
Digital Input
Terminal (Optical)
(DVD)
RCA Extension Cable
Remote On Lead (Blue/White)
AUX Video Input
Terminal (AUX1)
AV-Interface Unit
TME-M790 etc.
(Sold Separately)
AUX Audio Input
Terminal (AUX1)
Digital Audio Processor
PXA-H510/PXA-H900
(Sold Separately)
Monitor
TME-M790 etc.
(Sold Separately)
Setting of DHA-S680P
The DHA-S680P's system settings must be
made after connections are completed.
Before fixing the unit in place, refer to
page 48 to change the system setting.
Setting Item Setting
Ai-NET setting CD-CHG
H.U.CONTROL setting OFF