Handling The Magazine; Loading Discs - Alpine DHA-S680P Owner's Manual

Before Operation

Handling the magazine

Turn the power on before loading and unloading
discs. (See "Turning the power on and off" on page
10.)

Loading discs

1
Pull the tray removal knob with your finger and
draw the disc tray out of the magazine.
Be careful not to drop the disc.
Magazine
NOTE
Do not remove the disc tray from the magazine.
When the disc tray is pulled out from the magazine, do
not pull it out with excessive force. Doing so will cause
breakdown.
2
Set discs in the disc tray with the labeled side
facing up. Set one disc in the tray at a time (up
to 6 discs).
Be careful not to drop the disc.
After loading the discs, press the disc tray fully
into the magazine until it closes and a click is
heard.
8
-EN
Tray removal knob
Disc tray
3
Grasp the sliding door knob and slide the door
fully to the right.
Sliding door
4
Check to make sure the magazine is in the
proper direction (top/bottom and front/back), then
push it in fully until a click is heard and the
magazine is locked in place.
5
After inserting the magazine, grasp the tab of the
sliding door and slide the door all the way to the
left until it locks with a "click."
NOTES
• When the magazine is inserted, a check of the disc
inside the magazine is performed automatically.
• When this unit is directly connected to a disc
changer, insertion of a magazine into this unit while
the CD changer is playing will result in the sound of
the CD changer being muted because of the disc
check being performed.