Alpine DHA-S680P Owner's Manual

Dvd/video cd/cd changer

Hide thumbs Also See for DHA-S680P:

Setup manual (4 pages)

Table Of Contents

Table of Contents

Quick Links

Summary of Contents for Alpine DHA-S680P

Page 1 Innan du använder utrustningen bör du läsa igenom denna användarhandledning. DIGITAL VIDEO ALPINE ELECTRONICS, INC. ALPINE ELECTRONICS OF AUSTRALIA PTY. LTD. ALPINE ELECTRONICS FRANCE S.A.R.L. Tokyo office: 1-1-8 Nishi Gotanda, 6-8 Fiveways Boulevarde Keysborough, (RCS PONTOISE B 338 101 280)
Page 3: Table Of Contents
Changing the TV screen settings ........22 Specifications ..............62 Changing the country code setting ......... 23 Operating the DHA-S680P DVD Video Player ....63 Setting the rating level (parental lock) ......24 Operating audio for the Alpine Ai-NET ......64...
Page 4: Precautions
Precautions DO NOT OPERATE ANY FUNCTION THAT TAKES WARNING YOUR ATTENTION AWAY FROM SAFELY DRIVING YOUR VEHICLE. This symbol means important instructions. Failure to heed them can result in serious Any function that requires your prolonged attention injury or death. should only be performed after coming to a complete stop.
Page 5: Caution
HALT USE IMMEDIATELY IF A PROBLEM APPEARS. Failure to do so may cause personal injury or damage to the product. Return it to your authorized Alpine dealer or the nearest Alpine Service Center for repairing.
Page 6: Precautions
Installation Location to the outer edge. If the surface is heavily soiled, dampen Make sure the DHA-S680P will not be installed in a a clean, soft cloth in a solution of mild neutral detergent location subjected to: before cleaning the disc.
Page 7: Before Operation
Before Operation About DVDs Moreover, DVDs offer a variety of functions. Music CDs and DVDs have grooves (tracks) in • Multiple audio* (page 17) which the digital data is recorded. The data is Movies can be recorded in up to eight languages. The represented as microscopic pits recorded into the desired language can be selected from the remote control track –...
Page 8: Discs Playable On This Dvd Changer
Before Operation Discs playable on this DVD changer Handling of Compact Discs (CD/CD-R/CD-RW) Please observe the following points to avoid • Playable discs breakdown and operation faults: The discs listed below can be played on this DVD changer. Don’t touch the disc surface/Don’t leave in direct sunlight/Don’t affix labels or write on the disc/ Wipe away dust or dirt that adheres to the disc/ Max.
Page 9: When Using Remote Control
/ AUDIO Switching to “AUDIO” mode, makes it possible to Closing the cover operate Alpine audio products as well. Audio Push the cover in the arrow direction until a click operations are shown as the white characters on is heard.
Page 10: Handling The Magazine
Before Operation Handling the magazine Grasp the sliding door knob and slide the door fully to the right. Turn the power on before loading and unloading discs. (See “Turning the power on and off” on page 10.) Loading discs Pull the tray removal knob with your finger and draw the disc tray out of the magazine.
Page 11: Removing Discs
Removing discs Cautions on using the magazine • This product's magazine is used exclusively for Grasp the sliding door knob and slide the door this product. CD changer magazines (included fully to the right. magazines or accessories) cannot be used with this product.
Page 12: Quick Guide
Caution by using an Ai-NET Play Position Memory Function If the DHA-S680P is not connected to • Even if you turn power off or switch the Ignition Key to OFF during playback or change the source, an Ai-NET compatible head unit, read playback will continue from the point where the section “Changing the system...
Page 13: Switching Between Ntsc And Pal Configuration
Press and hold the DISC DN or DISC UP button Video CD for at least 2 seconds. The disc will be changed. • Using the Number Keys The DHA-S680P detects the disc (DVD, Video Tips This describes use of the Number Keys, CD, CD) automatically and starts playback.
Page 14: Playing Discs
Quick Guide : : : : : Press the button. Playback starts. NOTES • During play, the front panel indicators of this unit flash. Playing a DVD: The DVD VIDEO indicator flashes Playing a video CD: The VIDEO CD indicator flashes Playing a CD: The AUDIO CD indicator flashes •...
Page 15: Stopping Playback
Video CD Stopping playback Fast-forwarding/ Video CD fast-reversing Press the stop button during playback to stop playback. That position is stored in the memory. During playback, press and hold the (fast- reverse) or (fast-forward) button for at least Press the button during playback.
Page 16: Finding The Beginnings Of Chapters Or Tracks
Quick Guide Playing still frames Video CD (pausing) During playback, press the button once. Press the button to resume playback. NOTES • No sound is played during the still frame mode. • When a playback starts after about 5 minutes of MUTE temporary still (pause), a picture or sound may stop for an instant period, but this is not a failure.
Page 17: Convenient Functions
Convenient Functions Searching by title number Searching directly Video CD by chapter or track number Use this function to easily find positions on the DVD using the DVD’s title menu. Use this function to easily move to the beginnings of the chapters or tracks on the disc. During playback, press the GO TO button.
Page 18: Searching By Elapsed Time
Convenient Functions NOTES • To input the elapsed time, the “+10” key is not used. Use the number keys “0” to “9”. • Press the CLR button to delete the last digit in the elapsed time. Press the CLR button for at least 2 seconds to erase all the set times.
Page 19: Switching The Audio Language
Switching the audio language Switching the angle Video CD On DVDs including multiple audio modes or With DVDs on which images photographed from multiple audio languages, the audio language multiple angles are recorded, the angle can be switched during playback. can be switched during playback.
Page 20: Switching The Subtitles (Subtitle Language)
Convenient Functions Displaying the subtitles With DVDs on which subtitles are recorded, you can select whether to display the subtitles or not during playback. During playback, press and hold the – ON/OFF ON/OFF button for at least 2 seconds. The currently displayed subtitles are turned on SUB T.
Page 21: Displaying The Disc Status
Video CD Displaying the disc status Displaying the disc status Use the procedure described below to display Use the procedure described below to display the status (title number, chapter number, etc.) of the status (track number, etc.) of the currently the currently playing DVD on the screen.
Page 22: To Output The Dvd Video While Listening To Other Source (Cd/Radio Etc.) (Only When Using Ai-Net)
Ai-NET) • If the monitor has no rear monitor select function, the rear monitor cannot be connected. When the DHA-S680P is connected to an Ai- NET compatible head unit or Ai-NET compatible • Watching the DVD/video CD with CVA-...
Page 23: Default Settings (Set Up)
Default Settings (SET UP) Changing the language settings The setup screen for the selected language is displayed. The audio language, subtitle language and menu language can be set according to your preferences. AUDIO (audio languages) NOTE When the settings are changed, the old settings are overwritten.
Page 24: Changing The Tv Screen Settings
Default Settings (SET UP) Use the Joystick to make the selection, then press the ENT button. 4 : 3 LETTERBOX Select this when connected to a conventional 4:3 size (normal TV aspect ratio) monitor. There may be black stripes visible at the top and bottom of the screen.
Page 25: Changing The Country Code Setting
NOTES Use keys “0” to “9” to input the 4-digit country • For some discs, the picture may not be set to the code, then press the ENT button. selected screen size. (For details, refer to the explanation on the disc’s jacket.) •...
Page 26: Setting The Rating Level (Parental Lock)
Default Settings (SET UP) Press the ENT button. The password input mode is set. Use keys “0” to “9” to input the 4-digit password. The default password is 1111 upon shipment from the factory. Setting the rating level (parental lock) Use this function to restrict the viewing of movies Input numbers are displayed “...
Page 27 Use the Joystick to select the rating level, then • Changing the rating level temporarily press the ENT button. Some discs may request that you Tips Select “OFF” to cancel the parental lock or if you change the rating level set in the default do not want to set a rating level.
Page 28: Changing The Down Sampling Setting
Default Settings (SET UP) Move the Joystick up and down to choose “ON” or “OFF” and, then press the ENT button. The digital signals recorded on the DVD disc with 96 kHz/24bit, 96 kHz/20bit, 96 kHz/16bit, 48 kHz/ 24bit, 48 kHz/20bit sampling are converted into digital signals with 48 kHz/16bits sampling for output from the optical cable.
Page 29: Changing The Digital Output Setting
Changing the digital output setting Use the Joystick to select “DIGITAL OUT”, then press the ENT button. Use the following procedure to set the audio signal output from the DHA-S680P. Use the Joystick to make the selection, then press the ENT button. NOTE...
Page 30: Changing The Led Indicator Setting
Default Settings (SET UP) Use the Joystick to select the “ON” or “OFF”, then press the ENT button. The LED indicators are lit, indicating the product’s operating status. “ON” is selected upon shipment from the factory. The LED indicators are turned off. When “OFF”...
Page 31: Custom Setting - Changing The Closed Caption Setting
Custom setting – Changing the Move the Joystick up and down to select “ON” or “OFF”, then press the ENT button. Closed Caption setting DVD includes so-called “closed captions” which describe the scene to persons with impaired hearing. It is possible to turn the closed captions ON and OFF.
Page 32: Custom Setting - Changing The Ai-Net Settings
The settings are not cleared even when the vehicle’s battery is disconnected. aforementioned head units, identification of the DHA-S680P will no longer be possible In the stop mode, press and hold the SET button and operation from the head unit will no for at least 2 seconds.
Page 33: Custom Setting - Changing The H.u. Control Settings
CVA-1006R/CVA-1003R/IVX-M706/IVX-C806 side • “DVD-CHG” is not displayed on the menu screen at the CVA-1006R/CVA-1003R/IVX-M706/IVX-C806 side The cause of this is that the DHA-S680P Ai-NET setting is “CD-CHG.” Use the following method to change the setting. 1. Press the CVA-1006R/CVA-1003R/IVX-M706/IVX- C806 SOURCE switch and select CD-CHG from the menu.
Page 34: Digital Audio Processor (Optional)
A. PROC BAND When used with a digital audio processor (PXA- H510/PXA-H900), operation is possible from the remote control unit included with the DHA-S680P. Also refer to the PXA-H510/PXA-H900’s operating instructions. Adjusting the parametric equalizer Use the Joystick to adjust the frequency, then (only when connected with PXA- press the ENT button.
Page 35: Adjusting The Surround Settings
Storing the surround settings Adjusting the surround settings Six kinds of parametric EQ adjustment or setting This adjustment is not possible when Dolby contents can be memorized. Digital or Pro Logic is turned on for the DHA- S680P’s audio output. During playback, press the A.PROC button.
Page 36: Recalling The Surround Settings
Press the A.PROC button to close the digital button. audio processor screen and return to the playback screen. NOTE When connected with PXA-H900, the DHA-S680P cannot make time correction adjustment. (The adjustment menu is displayed.) NOTE Press the RTN button to return to the previous screen.
Page 37: Using The Pro Logic Mode
Video CD Using the Pro Logic mode ADJUST – Video CD Setting the speaker mode Switch between the Dolby Digital input and the Pro Logic input. NOTE This adjustment cannot be made when Dolby Pro Logic is set to “OFF”. During playback, press the A.PROC button.
Page 38: Adjust - Adjusting The Acoustic Image
Digital Audio Processor (Optional) Use the Joystick to adjust the level, then press the ENT button. NOTE Press the RTN button to return to the previous screen. Press the A.PROC button to close the digital audio processor screen and return to the playback screen.
Page 39: Adjust - Center Speaker Time Compensation
ADJUST – Center speaker ADJUST – Rear speaker Video CD Video CD time compensation time compensation NOTE NOTE Compensation is not possible when the center speaker Compensation is not possible when the rear speakers is set to “OFF”. are set to “OFF”. During playback, press the A.PROC button.
Page 40: Achieving Powerful Sound At Low Volumes
Digital Audio Processor (Optional) Press the A.PROC button to close the digital audio processor screen and return to the playback screen. ADJUST – Video CD Adjusting the speaker level During playback, press the A.PROC button. The setting menu appears. Use the Joystick to select “ADJUST”, then press the ENT button.
Page 41: Mode - Adjusting The Subwoofer
During playback, press the A.PROC button. Use the Joystick to select the mode (“ON” or The setting menu appears. “OFF” ), then press the ENT button. NOTE The subwoofer cannot be adjusted when set to “OFF”. Use the Joystick to select the level item, then press the ENT button.
Page 42: Other Useful Features
TITLE REPEAT Operating from the head unit Playing DVDs, video CDs and CDs The DHA-S680P can also be operated from the Press the SOURCE button and select the ALPINE Ai-NET compatible head unit. changer mode. Refer to the manual of the head unit.
Page 43: Operating From The Head Unit's Remote Control Unit
SOURCE AUDIO RUE-4187 RUE-4185 RUE-4167 RUE-4160 Operating from the head unit’s remote control unit The DHA-S680P can be operated from the remote control unit included with the head unit. Remote control operations Remote Control unit RUE-4187 RUE-4185 RUE-4167 RUE-4160 Operation...
Page 44: Installation And Connections
Installation and Connections Before installing or connecting the unit, please DO NOT USE BOLTS OR NUTS IN THE BRAKE OR read the following and pages 2 and 3 of this STEERING SYSTEMS TO MAKE GROUND manual thoroughly for proper use. CONNECTIONS.
Page 45: Precautions
When connecting the screw (M5x15) DHA-S680P to the fuse box, make sure the fuse for the intended circuit of the DHA-S680P has the appropriate amperage. Failure to do so may result in damage to the...
Page 46: Mounting
Be careful that the vehicle’s cords do not touch free from dirt or grease. the DHA-S680P. If the cords are in contact with the DHA-S680P, Press the double-sided adhesive tape onto the their sheaths may be damaged due to vibrations generated while the vehicle is running, resulting back of the remote control sensor unit.
Page 47 Be sure to remove these keys according to the angle of installation. The before installing the DHA-S680P. So as not to product will not provide the regular resistance to lose the keys, store them in the special plastic...
Page 48: Check
Installation and Connections 3 Make X-shaped cuts in the carpet. To install vertically, attach to the floor using the hexagonal washer faced tapping screws (M5x15) NOTE When installing vertically and using an audio RCA cable, always use an L shaped connector. Using a Install on top of the carpet using the straight shaped connector could damage the connector hexagonal washer faced nuts (M6) 4 .
Page 49: Connections
Cable Color Cable Specifications • Digital Output Terminal (Optical) This terminal is used to connect DHA-S680P to ALPINE digital audio processor (PXA-H510 or PXA-H900). These products include a fiber optic cable that will plug directly into the Digital Output Terminal of the DHA-S680P.
Page 50: Changing The System Settings
Changing the System Settings When the DHA-S680P is connected to an Alpine AV head unit or a regular Alpine head unit, its system settings must be made. Be sure to change the system settings before fastening the DHA-S680P in place.
Page 51: Examples Of System Upgrades
AV head unit. • When connecting the optical digital output to an In this case, if set to “OFF” the DHA-S680P ALPINE digital audio processor (such as the cannot be controlled from the head unit, and PXA-H510 and PXA-H900), be sure to make...
Page 52 • When using in a system with a head unit that is not Ai-NET compatible and a digital audio processor, only connect the DHA-S680P and digital audio processor using an optical fiber cable. Do not connect an Ai-NET output cable, or it will not be possible to control the digital audio processor from the DHA-S680P.
Page 53 NOTES • Be sure to switch the head unit's system switch before turning the power on. • Be sure to connect the DHA-S680P's video output/audio output (when using a rear monitor) to the AUX1 of AV head unit. • The switched Power Lead (Ignition) connection is not needed.
Page 54 • To connect a rear monitor, connect to the front monitor's RCA output (TV Tuner Box). • When a CD changer is connected to the DHA-S680P, inserting a magazine into the DHA-S680P while the CD changer is playing will result in the sound of the CD changer being muted because of the DHA-S680P disc check being performed.
Page 55 • To connect a rear monitor, connect to the front monitor's RCA output (TV Tuner Box). • When a CD changer is connected to the DHA-S680P, inserting a magazine into the DHA-S680P while the CD changer is playing will result in the sound of the CD changer being muted because of the DHA-S680P disc check being performed.
Page 56 • To connect a rear monitor, connect to the front monitor's RCA output (TV Tuner Box). • When a CD changer is connected to the DHA-S680P, inserting a magazine into the DHA-S680P while the CD changer is playing will result in the sound of the CD changer being muted because of the DHA-S680P disc check being performed.
Page 57 Digital 5.1 Channel Surround and other effects even when connection is made to the CHANGER connectors. • Even when the DHA-S680P Ai-NET settings are set to CD-CHG, making connection of the optical digital output to the digital audio processor allows you to enjoy Dolby Digital 5.1 Channel Surround and other effects.
Page 58 • When using the Versatile Link Terminal (KCA-410C) and connecting the DHA-S680P, connect the DHA-S680P Ai-NET cable to the CHANGER1 connector of the KCA-410C. • When combining the DHA-S680P and the CD changer (CHA-S624), the optical digital output of the CHA-S624 cannot be used.
Page 59 CHANGER1 connector of the KCA-410C. Before connecting KCA-410C, change the system setting (page 56) of DHA-S680P. • Even when the DHA-S680P Ai-NET settings are set to CD-CHG, making connection of the optical digital output to the digital audio processor allows you to enjoy Dolby Digital 5.1 Channel Surround and other effects.
Page 60: Others Se
DVD video software must also have a DTS sound H510/PXA-H900) is required to enjoy full 5.1- track. channel surround sound. The DHA-S680P performs Dolby Digital decoding Dolby Pro Logic when it outputs analog audio signals, it just happens Dolby Pro Logic is the technology used to decode to be 2-channel audio not 5.1-channel.
Page 61: List Of Language Codes
List of language codes (For details, see page 21.) Abbreviation Code Language Abbreviation Code Language Abbreviation Code Language 6565 Afar 7369 Interlingue 8278 Kirundi 6566 Abkhazian 7375 Inupiak 8279 Romanian 6570 Afrikaans 7378 Indonesian 8285 Russian 6577 Amharic 7383 Icelandic 8287 Kinyarwanda Arabic...
Page 62: List Of Country Codes
Others List of country codes (For details, see page 23.) Abbreviation Code Country Abbreviation Code Country Abbreviation Code Country 6568 Andorra 6877 Dominica 7573 Kiribati 6569 United Arab Emirates 6879 Dominican Republic 7577 Comoros Afghanistan 6890 Algeria 7578 Saint Kitts and Nevis 6570 6967 Ecuador...
Page 63 Abbreviation Code Country Abbreviation Code Country Abbreviation Code Country 8069 Peru 8374 Svalbard and Jan Mayen 8487 Taiwan, Province of China 8070 French Polynesia 8375 Slovakia 8490 Tanzania, United Republic of 8071 Papua New Guinea 8376 Sierra Leone 8565 Ukraine 8072 Philippines 8377...
Page 64: In Case Of Difficulty
• If operation freezes, the screen goes black or the unit should otherwise not function properly, try turning the power off then back on. Alternatively, try the following methods in the order listed until the DHA-S680P returns to normal playback mode: 1) Change the source from DVD to another source then return to DVD mode.
Page 65: Operating The Dha-S680P Dvd Video Player
Video Player 8 DISP. Button ( P19) Displays the playback state on the screen. When operating the DHA-S680P set the DVD/ DISC DN ( P11) AUDIO switch to the “DVD” side. Press and hold the button for at least 2 seconds to select the disc in the magazine.
Page 66: Operating Audio For The Alpine Ai-Net
Operating audio for the Alpine Ai- Switches to CHANGER Mode (DVD changer/CD Changer). Changer switching When operating audio for the Alpine Ai-NET, set (In case two or more changers are connected.) the DVD/AUDIO switch to the “AUDIO” side. y V.SEL Button V.SEL Switching...
Page 67 Händlerstemple Tipps der Polizei: Stellen Sie Ihr Fahrzeug stets gut sichtbar ab. Verschließen Sie Türen, Fenster, Schiebedach und Kofferraum immer, auch bei nur kurzer Abwesenheit. Lassen Sie keine Wertsachen sichtbar im Auto liegen. Wird Ihr Fahrzeug aufgebrochen, wenden Sie sich sofort an die nächste Polizeidienststelle. Belassen Sie Ihr Fahrzeug nach einem Aufbruch im Originalzustand.
Page 68 Car Audio and Navigation Systems GERÄTE-PASS AUDIO SYSTEME Fahrzeugmarke: Typ: Amtl. Kennzeichen: Name des Halters: Straße: Wohnort: Bitte füllen Sie diesen Pass vollständig aus und bewahren Sie ihn außerhalb des Fahrzeugs auf: Im Falle eines Diebstahls wird für Sie die Schadensabwicklung mit der Versicherung einfacher, und Sie erleichtern der Polizei die Fahndung nach den Tätern.

Alpine DHA-S680P Owner's Manual

Precautions

Warning

Caution

Precautions

Before Operation

Quick Guide

Convenient Functions

Default Settings (SET UP)

Digital Audio Processor (Optional)

Other Useful Features

Installation and Connections

Others SE

Quick Links

Related Manuals for Alpine DHA-S680P

Summary of Contents for Alpine DHA-S680P

Table of Contents