Custom Setting - Changing The H.u. Control Settings; Changing H.u. Control Settings - Alpine DHA-S680P Owner's Manual

NOTES
When the DVD-CHG mode cannot be called at the
CVA-1006R/CVA-1003R/IVX-M706/IVX-C806 side
• "DVD-CHG" is not displayed on the menu screen at
the CVA-1006R/CVA-1003R/IVX-M706/IVX-C806
side
The cause of this is that the DHA-S680P Ai-NET setting
is "CD-CHG."
Use the following method to change the setting.
1. Press the CVA-1006R/CVA-1003R/IVX-M706/IVX-
C806 SOURCE switch and select CD-CHG from the
menu.
2. Select "AUX1" with the V.SEL switch. This will
display the DHA-S680P screen (when DHA-S680P is
connected to AUX1).
3. Set the Ai-NET setting to "DVD-CHG" with the
DHA-S680P. See "Custom Setting – Changing the Ai-
NET settings" (on Page 30).
4. Switch OFF the car's ignition switch, then switch it
back ON again.
Custom setting – Changing the
H.U. CONTROL settings
When connecting the equipment with an Ai-NET
compatible head unit or an Ai-NET compatible
AV-head unit, set the equipment so that it is
possible to control from the head unit.
NOTE
When the settings are changed, the old settings are
overwritten. Make a note of the current settings before
making changes. The settings are not cleared even
when the vehicle's battery is disconnected.
1
In the stop mode, press and hold the SET button
for at least 2 seconds.
The default setting menu appears.
NOTE
This operation cannot be performed in the PRE-STOP
mode. When the disc is being played, press the
twice to set the stop mode.
2
Use the Joystick to select "CUSTOM SETUP",
then press the ENT button.
3
Move the Joystick up and down to select "H.U.
CONTROL", then press the ENT button.
4
Move the Joystick up and down to select "ON"
or "OFF", then press the ENT button.
ON
Set to "ON" with ALPINE Ai-NET system
connected. Operations can be performed from
the Ai-NET compatible head unit or Ai-NET
compatible AV head unit.
OFF
Set to "OFF" without ALPINE Ai-NET system
connected.
NOTE
Press the RTN button to return to the previous screen.
5
Press and hold the SET button for at least 2
seconds.
The settings are stored and the set up mode is
canceled.
6
Turn off the vehicle's ignition, then turn it on
again.
button
FR
ES
DE
IT
SE
31
-EN