Setting The Subwoofer Level; Setting The Bass Control; Setting The Bass Center Frequency; Setting The Bass Bandwidth - Alpine cda-9884 Owner's Manual

Alpine mp3/wma/aac cd receiver owner's manual cda-9884
Hide thumbs Also See for cda-9884:
Table of Contents

Advertisement

Available languages

Available languages

Setting the Subwoofer Level

You can change the Subwoofer Level to create your own tonal
preference.
1
Press SOUND SETUP to activate the Sound Setting
mode.
2
Turn the Rotary encoder to select the SUBW
LEVEL Adjustment mode, and then press
/ENT.
1
2
2
2
SUBW LEVEL*
BASS*
TREBLE*
HPF*
SUBW LEVEL
3
Turn the Rotary encoder to select the desired
subwoofer level (0~+15).
• If no operation is performed for 15 seconds, the unit will return to
normal mode automatically.
• When subwoofer is set to OFF and DEFEAT is set to ON, pressing
the SOUND SETUP button momentarily will not be functional.
1
*
When the subwoofer mode is set to OFF, its level cannot be adjusted,
refer to “Turning Subwoofer ON/OFF” (page 14).
The adjustment can also be made by pressing Rotary encoder
(AUDIO). Refer to “Adjusting Subwoofer Level/Bass Level/Treble
Level/Balance (Between Left and Right)/Fader (Between Front and
Rear)/Defeat” (page 12).
2
*
The function is inoperable when DEFEAT is set to ON.

Setting the Bass Control

You can change the Bass Frequency emphasis to create your own tonal
preference.
1
Press SOUND SETUP to activate the Sound Setting
mode.
2
Turn the Rotary encoder to select the BASS
Adjustment mode, and then press
/ENT.
3
4
4
4
SUBW LEVEL*
BASS*
TREBLE*
HPF*
SUBW LEVEL

Setting the Bass Center Frequency

3
-1 Press BAND to select the desired bass center
frequency.
80 Hz
100 Hz
200 Hz
60 Hz
80 Hz
Emphasizes the displayed bass frequency ranges.

Setting the Bass Bandwidth

3
-2 Press SOURCE/
to select the desired bass
bandwidth.
1
2
3
4
Changes the boosted bass bandwidth to wide or narrow. A
wider setting will boost a wide range of frequencies above
and below the center frequency. A narrower setting will
boost only frequencies near the center frequency.

Setting the Bass Level

3
5
-3
Turn the Rotary encoder to select the desired
*
bass level (–7~+7).
You can emphasize or weaken the bass level.
4
Press and hold
/ESC for at least 2 seconds to
return to normal mode.
• If no operation is performed for 15 seconds, the unit will return to
normal mode automatically.
• The bass level settings will be individually memorized for each
source (FM, AM, CD, etc.) until the setting is changed. The bass
frequency and bass bandwidth settings adjusted for one source are
effective for all other sources (FM, AM, CD, etc.).
• Depending on the connected devices, some functions and display
indications do not work. However, Bass Level is still adjustable if an
audio processor with the Bass function is connected.
• When subwoofer is set to OFF and DEFEAT is set to ON, pressing
the SOUND SETUP button momentarily will not be functional.
3
*
When the subwoofer mode is set to OFF, its level cannot be adjusted.
Refer to “Turning Subwoofer ON/OFF” (page 14).
4
*
The function is inoperable when DEFEAT is set to ON.
5
*
The adjustment can also be made by pressing Rotary encoder
(AUDIO). Refer to “Adjusting Subwoofer Level/Bass Level/Treble
Level/Balance (Between Left and Right)/Fader (Between Front and
Rear)/Defeat” (page 12).

Setting the Treble Control

You can change the Treble Frequency emphasis to create your own tonal
preference.
1
Press SOUND SETUP to activate the Sound Setting
mode.
2
Turn the Rotary encoder to select the TREBLE
Adjustment mode, and then press
/ENT.
6
7
7
7
SUBW LEVEL*
BASS*
TREBLE*
HPF*
SUBW LEVEL

Setting the Treble Center Frequency

3
-1 Press BAND to select the desired treble center
frequency.
10.0 kHz
12.5 kHz
15.0 kHz
17.5 kHz
10.0 kHz
Emphasizes the displayed treble frequency ranges.

Setting the Treble Level

3
8
-2
Turn the Rotary encoder to select the desired
*
treble level (–7~+7).
You can emphasize or weaken the treble level.
4
Press and hold
/ESC for at least 2 seconds to
return to normal mode.
• If no operation is performed for 15 seconds, the unit will return to
normal mode automatically.
• The treble level settings will be individually memorized for each
source (FM, AM, CD, etc.) until the setting is changed. The Treble
frequency settings adjusted for one source are effective for all other
sources (FM, AM, CD, etc.).
Page 13

Hide quick links:

Advertisement

Table of Contents
loading

Table of Contents