Radio; Listening To Radio; Presetting Stations Manually; Presetting Stations Automatically - Alpine iDA-X301RR Owner's Manual

Radio

iDA-X303
SOURCE
Double Action encoder
BAND/TA TUNE/A.ME
/ENTER
iDA-X301/iDA-X301RR
SOURCE
Rotary encoder
/ENTER
BAND/TA TUNE/A.ME

Listening to Radio

1
Press SOURCE to select TUNER mode.
2
Press BAND/TA repeatedly until the desired radio
band is displayed.
FM1 FM2 FM3 MW
3
Press TUNE/A.ME to select the tuning mode.
DX SEEK (Distance mode)
(Blank) (Manual mode)
• The initial mode is Distance mode.
Distance mode:
Both strong and weak stations will be automatically tuned in
(Automatic Seek Tuning).
Local mode:
Only strong stations will be automatically tuned in (Automatic
Seek Tuning).
Manual mode:
The frequency is manually tuned in steps (Manual tuning).
4
Press or to tune in the desired station.
Holding down or
continuously.

Presetting Stations Manually

1
Select the radio band and tune in a desired radio
station you wish to store in the preset memory.
2
Press PRESET.
The Preset screen is displayed.
PRESET
PRESET
LW FM1
SEEK (Local mode)
DX SEEK (Distance mode)
will change the frequency
3
Turn the Double Action encoder (iDA-X303 only)
or Rotary encoder (iDA-X301/iDA-X301RR only) to
select the preset number.
4
Press and hold /ENTER for at least 2 seconds.
The selected station is stored.
The display shows the band, preset number and station
frequency memorized.
• A total of 30 stations can be stored in the preset memory (6 stations
for each band; FM1, FM2, FM3, MW and LW).
• If you store a station in a preset memory which already has a station,
the current station will be cleared and replaced with the new station.

Presetting Stations Automatically

1
Press BAND/TA repeatedly until the desired radio
band is displayed.
2
Press and hold TUNE/A.ME for at least 2 seconds.
The tuner will automatically seek and store 6 strong stations
in the selected band. They will be stored 1 to 6 in order of
signal strength.
When the automatic memory has been completed, the tuner
goes to the station stored in preset location No.1.
• If no stations are stored, the tuner will return to the original station
you were listening to before the auto memory procedure began.

Tuning to Preset Stations

1
Press BAND/TA repeatedly until the desired band is
displayed.
2
Press PRESET.
The Preset screen is displayed.
3
Turn the Double Action encoder (iDA-X303 only)
or Rotary encoder (iDA-X301/iDA-X301RR only) to
select a radio station.
4
Press /ENTER.
The display shows the band, preset number and frequency
of the station selected.

Frequency Search Function

You can search for a radio station by its frequency.
1
Press /ENTER in Radio mode to activate
Frequency search mode.
2
Turn the Double Action encoder (iDA-X303 only)
or Rotary encoder (iDA-X301/iDA-X301RR only) to
select the desired frequency.
3
Press /ENTER to receive the selected frequency.
• Press in the search mode to cancel. Or, the search mode will be
cancelled if no operation is performed for 10 seconds.
7
-EN