Indication For Usb Memory - Alpine iDA-X301RR Owner's Manual

• Caused by the iPhone/iPod Software Version not being
compatible with this unit.
- Update the iPhone/iPod Software Version to be compatible
with this unit.
3
• The iPod is not verified.
- Try another iPod.
Indication for iPod Mode
(Direct Connection), (iDA-X301/
iDA-X301RR only)
• The iPod is not connected.
- Make sure the iPod is correctly connected (refer to
"Connections").
Make sure the cable is not bent excessively.
• There are no songs in the iPod.
- Download songs to the iPod and connect to this unit.
• Communication error.
- Turn the ignition key off, and then set to ON again.
- Reset the iPod.
- Check the display by reconnecting between the iPod and this
unit using the FULL SPEED™ Connection Cable
(KCE-433iV).
• Caused by the iPod Software Version not being compatible with
this unit.
- Update the iPod Software Version to be compatible with this unit.

Indication for USB memory

CURRENT
ERROR
• Abnormal current is run to the USB connector device (an error
message may be displayed if the USB device that is not
compatible with the unit is connected).
USB memory is a malfunction or it is shorted.
- Connect another USB Flash Memory device.
DEVICE
ERROR
• A USB device that is not supported by the unit is connected.
- Connect a USB device that is supported by the unit.
NO USB
DEVICE
• A USB memory is not connected.
- Make sure the USB memory device is correctly connected and
the cable is not excessively bent.
• No song (file) is stored in the USB memory.
- Connect the USB memory device after storing songs (files).
UNSUPORT
• A sampling rate/bit rate not supported by the unit is used.
- Use a sampling rate/bit rate that is supported by the unit.
• A copy-protected WMA file was played back.
- You can only play back non-copy-protected files.
NO SUPPORT
• Text information that is not recognizable by the unit has been
input.
- Use a USB memory device with input text information that is
supported by the unit.
Indication for Portable audio player Mode
(iDA-X303 only)
CURRENT
ERROR
• Abnormal current is being drawn by the device connected to
USB. An error message may be displayed if the device
connected is not compatible. The USB Flash Memory device
may be defective.
- Attempt to connect another Portable audio player.
DEVICE
ERROR
• A Portable audio player that is not supported by the unit is
connected.
- Attempt to connect another Portable audio player.
NO USB
DEVICE
• A Portable audio player is not connected.
- Make sure the Portable audio player is correctly connected and
the cable is not excessively bent.
NO SONG
• There are no songs in the Portable audio player.
- Download songs to the Portable audio player and connect to
this unit.
NO SUPPORT
• Text information that is no supported on the unit has been input.
- Use a Portable audio player in which text information is input
that is supported on the unit.
35
-EN