ProForm 130 Elliptical User Manual page 23

HOW TO CONNECT YOUR VCR
Note: If your VCR has an unused AUDIO OUT jack,
see instruction A below. If the AUDIO OUT jack is
being used, see instruction B. If you have a TV
with a built-in VCR, see instruction B. If your VCR
is connected to your home stereo, see HOW TO
CONNECT YOUR HOME STEREO on page 22.
A. Plug one end of a 1/8" to RCA stereo audio cable
(available at electronics stores) into the jack
beneath the console. Plug the other end of the
cable into the AUDIO OUT jack on your VCR.
A
B. Plug one end of a 1/8" to RCA stereo audio cable
(available at electronics stores) into the jack
beneath the console. Plug the other end of the
cable into an RCA Y-adapter (available at electron-
ics stores). Next, remove the wire that is currently
plugged into the AUDIO OUT jack on your VCR
and plug the wire into the unused side of the Y-
adapter. Plug the Y-adapter into the AUDIO OUT
jack on your VCR.
B
Audio Cable
Wire removed from
AUDIO OUT jack
HOW TO USE AN IFIT.COM CD OR VIDEO
PROGRAM
To use an iFIT.com CD or video program, the elliptical
exerciser must be connected to your CD player or
VCR. See HOW TO CONNECT YOUR CD PLAYER,
VCR, OR COMPUTER on pages 21 to 23. To pur-
chase iFIT.com CDs or videocassettes, call the
toll-free telephone number on the front cover of
this manual.
Follow the steps below to use an iFIT.com CD or
video program.
1. Press the Resistance decrease button or begin
ANT. IN
VIDEO AUDIO
IN
RF OUT
CH
3 4
OUT
AUDIO OUT
RIGHT
LEFT
2. Select the iFIT.com mode.
Audio
Cable
3. Press the Play button on your CD player or
ANT. IN
VIDEO AUDIO
IN
RF OUT
CH
3 4
OUT
RCA
Y-adapter
23
pedaling to turn on the console.
A moment after the console is turned on, the dis-
play will light.
To select the iFIT.com
mode, press the
Programs button
repeatedly until the
track and the letters
"iFIT" appear in the
display.
VCR.
Note: If you are using an iFIT.com CD, insert the
CD into your CD player; if you are using an
iFIT.com videocassette, insert the videocassette
into your VCR.
A moment after the play button is pressed, your
personal trainer will begin guiding you through
your workout. Simply follow your personal trainer's
instructions.
The program will function in almost the same way
as a resistance & rpm program (see step 3 on
page 19). However, an electronic "chirping" sound
will alert you when the resistance setting and/or
pace setting is about to change.