Page 1
Model No. PFEL59911.2 Serial No. USER’S MANUAL Write the serial number in the space above for reference. Serial Number Decal (under frame) QUESTIONS? If you have questions, or if parts are damaged or missing, DO NOT CONTACT THE STORE; please contact Customer Care.
IMPORTANT PRECAUTIONS WARNING: To reduce the risk of serious injury, read all important precautions and instructions in this manual and all warnings on your elliptical before using your elliptical. ICON assumes no responsibility for personal injury or property damage sustained by or through the use of this product.
BEFORE YOU BEGIN Thank you for selecting the revolutionary PROFORM manual. To help us assist you, note the product model ® 18.0 RE elliptical. The 18.0 RE elliptical provides an number and serial number before contacting us. The impressive selection of features designed to make your model number and the location of the serial number workouts at home more effective and enjoyable.
PART IDENTIFICATION CHART Use the drawings below to identify the small parts needed for assembly. The number in parentheses below each drawing is the key number of the part, from the PART LIST near the end of this manual. The number following the key number is the quantity needed for assembly.
ASSEMBLY • To hire an authorized service technician to • In addition to the included tool(s), assembly assemble the elliptical, call 1-800-445-2480. requires the following tools: one Phillips screwdriver • Assembly requires two persons. one rubber mallet • Place all parts in a cleared area and remove the packing materials.
Page 7
3. Identify the Upright Cover (81). Orient the Upright Cover as shown, and slide it upward onto the Upright (4). Have a second person hold the Upright (4) and the Upright Cover (81) near the Frame (1). Connect the Upper Wire (152) to the Lower Wire (111).
Page 8
5. Identify the Right Upper Body Arm (61) and the Right Upper Body Leg (60), which are marked with “Right” stickers, and orient them as shown. Attach the Right Upper Body Arm (61) to the Right Upper Body Leg (60) with three M8 x 43mm Button Bolts (96) and three M8 Jam Nuts (102).
7. While a second person lifts the back of the Right Pedal Plate (14), insert the Right Pedal Bracket (133) into the Right Pedal Arm (58). Attach the Right Pedal Bracket (133) with an M10 x 20mm Screw (91) and an M10 x 25mm Washer (134).
Page 10
10. Apply grease to a Short Axle (149) and to two M8 x 22mm Washers (97). Next, tighten an M8 x 23mm Button Screw (82) and an M8 x 22mm Washer (97) a few turns into the Short Axle (149). While a second person holds the front end of the Right Link Arm (59) inside the bracket on the Right Upper Body Leg (60), insert the Short Axle...
Page 11
12. IMPORTANT: If you purchase the optional chest heart rate monitor (see page 22), see step 17 on page 13 to install the receiver included with the heart rate monitor. Orient the Rear Console Cover (80) as shown. Attach the Rear Console Cover (80) to the Upright (4) with four M4 x 16mm Screws (101).
Page 12
14. Attach the Front Console Cover (79) around the Upright (4) by pressing the tabs on the Front Console Cover into the Rear Console Cover (80). 15. See step 5. Tighten the six M8 x 43mm Button Bolts (96). See step 4. Tighten the eight M10 x 20mm Screws (91).
Page 13
If you purchase the optional heart rate monitor (see page 22), follow the step below to install the receiver included with the heart rate monitor. 17. Complete this step before you begin step 12. Note: It will be necessary to reverse steps 15, 14, 13, and 12 if you have already completed assembly.
HOW TO USE THE ELLIPTICAL HOW TO PLUG IN THE POWER CORD HOW TO MOVE THE ELLIPTICAL This product must be grounded. If it should malfunc- Due to the size and weight of the elliptical, moving tion or break down, grounding provides a path of least it requires two persons.
Page 15
HOW TO ADJUST THE POSITIONS OF THE PEDALS HOW TO EXERCISE ON THE ELLIPTICAL Each pedal can To mount the elliptical, hold the upper body arms or the be adjusted to handlebars and step onto the pedal that is in the lowest several positions.
Page 16
CONSOLE DIAGRAM FEATURES OF THE CONSOLE The console also features revolutionary iFit Live technology that enables the console to communicate The advanced console offers an array of features with your wireless network through an optional iFit Live designed to make your workouts more effective and module.
Page 17
HOW TO TURN ON THE POWER HOW TO USE THE MANUAL MODE IMPORTANT: If the elliptical has been exposed to 1. Begin pedaling or press any button on the cold temperatures, allow it to warm to room tem- console to turn on the console. perature before turning on the power.
Page 18
4. Follow your progress with the display. Stride—This display mode will show the total num- ber of strides you have pedaled. The display can show the following workout information: Time—When the manual mode is selected, this display mode will show the elapsed time. When a workout is selected, this display mode will show the time remaining in the workout.
Page 19
When a wireless iFit When your pulse is detected, a heart symbol in will Live module is con- flash in the display each time your heart beats, one nected, the wireless or two dashes will appear, and then your heart rate symbol at the top will be shown.
Page 20
HOW TO USE A PRESET WORKOUT At the end of each segment of the workout, a series of tones will sound and the next segment of 1. Begin pedaling or press any button on the the profile will begin to flash. If a different resis- console to turn on the console.
Page 21
HOW TO USE AN IFIT LIVE WORKOUT 5. Select an iFit Live workout. You must have an iFit Live module to use an iFit Live To select an iFit Live workout, press one of the workout. iFit Live buttons. Note: Before some workouts will download, you must go to www.iFit.com and add To purchase an iFit Live module at any time, go to them to your schedule.
7. Follow your progress with the display. HOW TO USE THE SOUND SYSTEM See step 4 on page 18. To play music or audio books through the console sound system while you exercise, plug the included The My Trail tab will show a map of the trail you are audio cable into the jack on the console and into a jack walking or running or it will show a track and the on your MP3 player or CD player;...
Page 23
HOW TO CHANGE CONSOLE SETTINGS 5. Adjust the contrast level of the display if desired. The console features a user mode that allows you to view usage information, select a unit of measurement, Press the decrease button to view the contrast and adjust the contrast level of the display.
MAINTENANCE AND TROUBLESHOOTING Inspect and tighten all parts of the elliptical regularly. HOW TO ADJUST THE REED SWITCH Replace any worn parts immediately. If the console does not display correct feedback, the To clean the elliptical, use a damp cloth and a small reed switch should be adjusted.
Page 25
Locate the Reed Switch (38). Loosen, but do not remove, the two M4 x 12.7mm Flange Screws (161). Next, rotate the Large Pulley (19) until a Magnet (43) is aligned with the Reed Switch (38). Slide the Reed Switch slightly toward or away from the Magnet. Then, retighten the M4 x 12.7mm Flange Screws (161).
EXERCISE GUIDELINES Burning Fat—To burn fat effectively, you must exer- WARNING: cise at a low intensity level for a sustained period of Before beginning this time. During the first few minutes of exercise, your or any exercise program, consult your physi- body uses carbohydrate calories for energy.
PART LIST Model No. PFEL59911.2 R1111A Key No. Qty. Description Key No. Qty. Description Frame Pedal Arm Roller Rear Stabilizer Tube Ramp Arm Roller Ramp Ramp Arm Upright 16mm Wave Washer M4 x 19mm Screw Axle Cover Front Left Stabilizer Tube...
Page 28
Key No. Qty. Description Key No. Qty. Description M4 x 16mm Screw Small Pulley Snap Ring M8 Jam Nut J-bolt M6 x 16mm Screw Ramp Arm Bushing Power Switch Ramp Arm Clamp M10 Split Washer M10 x 45mm Bolt Shield Mount M10 x 35mm Bolt M4 x 12mm TZP Screw M10 Square Nut...
ORDERING REPLACEMENT PARTS To order replacement parts, please see the front cover of this manual. To help us assist you, be prepared to provide the following information when contacting us: • the model number and serial number of the product (see the front cover of this manual) •...