Installing A Processor - Gateway 955 User Manual

Installing a processor

The server is compatible with Intel
detects the processors each time you turn on the server. Whenever you install
new processors, you should first install the most current version of the BIOS.
For instructions, see
Important
Warning
Warning
To replace a processor:
1
Install the most current BIOS version. For instructions, see
BIOS" on page
2
Follow the instructions in
page 45.
3
Follow the instructions in
®
Xeon processors. The server automatically
"Updating the BIOS" on page
You must have a processor in the Processor 1 socket, or
your server will not start.
If you are upgrading your server from one processor to two,
you may need to reconfigure your operating system so it
can recognize the additional processor. For more
information, see your operating system's documentation.
A heat sink must be installed on the processor. Installing
a processor without a heat sink could damage the
processor.
Processors and heat sinks may be hot if the computer has
been running. Before replacing a processor or heat sink,
allow them to cool for several minutes.
91.
"Preventing static electricity discharge" on
"Opening the server case" on page
www.gateway.com
Installing a processor
91.
"Updating the
46.
67