Installing A Processor - Gateway 8450R System Manual

9
Replace the EMI foam in the same orientation it was in when you
removed it.
10
Close the case. (See "Closing the case" on page 31.)
11
Reconnect the power cord and all other cords you removed, then turn
on the server.
Important

Installing a processor

When replacing a processor, order a processor upgrade kit from Gateway.
Caution
Gateway recommends that you run a processor retest from
the BIOS Setup utility whenever you replace or add a
processor.
A heatsink must be installed on each processor. Installing
a processor without a heatsink could result in damage to,
or failure of, the processor.
65
Processors