Gateway 980 User Manual page 73

Chapter 4: Installing Components
12
Lift the tray away from the case.
13
Insert the new system board tray into the case, then slide the tray toward
the back of the case.
14
Tighten the system board tray thumbscrew on the back of the case.
15
Reinstall the memory, processors, voltage regulators, and fans.
16
Connect the power and data cables.
17
Reinstall the expansion cards. For more information, see
expansion cards" on page
18
Follow the instructions in
19
Turn on your server.
20
Press F2 when the Gateway logo screen appears during startup. The BIOS
Setup utility opens.
21
Check BIOS settings to make sure that they detect the server's new
hardware, then save your changes (if any) and close the BIOS Setup utility.
68
47.
"Closing the server case" on page
www.gateway.com
"Installing PCI
32.