Chapter 4: Installing Components
To replace, add, or reseat a PCI expansion card:
1
Follow the instructions in
page
2
Follow the instructions in
3
If you are replacing a card, disconnect any cables that are attached to the
old card.
4
If you are removing a full-length card, pull back on the card retention clip
that secures the end of the card.
- OR -
If you are adding a full-length card to an empty expansion slot, pull back
on the card retention clip for that slot.
48
27.
www.gateway.com
"Preventing static electricity discharge" on
"Opening the server case" on page
28.