Setting Up The Hardware - Gateway 9415 User Manual

Setting up the hardware

To make sure that your working environment is safe:
■ Use a clean, dry, flat, stable surface for your server. Allow at least 6 inches at the back
of the server for cabling and air circulation.
■ Use the instructions on your server's setup poster to set up your hardware.
■
Use a grounded (three-prong) surge protector. A surge protector helps protect against
AC power fluctuations. For additional protection from power outages, we recommend
that you use an uninterruptible power supply (UPS).
Caution
■ Avoid subjecting your server to extreme temperature changes. Do not expose your
server to direct sunlight, heating ducts, or other heat-generating objects. Damage
caused by extreme temperatures is not covered by your warranty. As a general rule,
your server is safest at temperatures that are comfortable for you.
■
Keep your server and magnetic media away from equipment that generates magnetic
fields, such as unshielded stereo speakers. Strong magnetic fields can erase data on
both diskettes and hard drives. Even a telephone placed too close to the server may
cause interference.
Important
10
Your server comes with 3-wire AC power cords fitted with the correct
plug style for your region. If this plug does not match the connector
on your surge protector, UPS, or wall outlet, do not attempt to modify
the plug in any way. Use a surge protector, UPS, or wall outlet that
is appropriate for the supplied AC power cords.
Keep the server boxes and packing material in case you need to ship
the server.
www.gateway.com