Table of Contents
Advertisement
Appendix C: Technical Info
VT12 Specifications
Input Connectors
Instrument:
1/4" TS
Line:
1/4" TRS
Insert Return:
1/4" TRS
Mic:
XLR
Input Impedance
Instrument:
1 MΩ unbalanced
Line:
10 kΩ balanced
Mic:
1 kΩ balanced
Output Connectors
Line:
XLR
Phones:
1/4" TRS
Insert Send:
1/4" TRS
External Speaker: 1/4" TS
Output Impedance
Line:
150Ω balanced
Maximum Output Level
Line Out:
+20 dBu unbalanced
Insert Send:
+20 dBu unbalanced
Other Connectors
USB
Pedal (RJ45)
Output Power Rating
Main:
120 W rms
High Frequency:
30 W rms
External Speaker: 30 W rms into 4 ohms
Preamp Tubes
(2) 12AX7A
Correct disposal of this product. This symbol indicates that this product should not be disposed of with your household waste,
according to the WEEE Directive (2002/96/EC) and your national law. This product should be handed over to an authorized col-
lection site for recycling waste electrical and electronic equipment (EEE). Improper handling of this type of waste could have a
possible negative impact on the environment and human health due to potentially hazardous substances that are generally associ-
ated with EEE. At the same time, your cooperation in the correct disposal of this product will contribute to the effective usage of
natural resources. For more information about where you can drop off your waste equipment for recycling, please contact your
local city office, waste authority, or your household waste disposal service.
8
hotwire VT1
Speaker Specs
Custom 12" speaker with neodymium magnet
1.35" Celestion neodymium compression driver with custom
waveguide
EQ
Treble
Middle
Bass
Presence
EQ center frequencies and gain ranges depend on USA/UK tone
stack switch setting [10].
Digital Signal Processing
32-bit floating point
AC Power Requirements
Power Consumption: 500 watts
Universal AC Power Supply:
100 VAC – 240 VAC, 50-60 Hz, auto-switching
Physical Dimensions and Weight
Height:
17.00 in/432 mm
17.75 in/451 mm including feet
Width:
18.25 in/464 mm
Depth:
10.00 in/254 mm
Weight:
25.0 lb/11.4 kg
LOUD Technologies Inc. is always striving to improve our prod-
ucts by incorporating new and improved materials, components,
and manufacturing methods. Therefore, we reserve the right to
change these specifications at any time without notice.
"Mackie.", "Hotwire," and the "Running Man" are registered
trademarks of LOUD Technologies Inc. All other brand names
mentioned are trademarks or registered trademarks of their
respective holders, and are hereby acknowledged.
©2008 LOUD Technologies Inc. All Rights Reserved.
Advertisement
Table of Contents
