Table of Contents
Advertisement
Firmware Updater: Check the Mackie website to
see if new firmware is available for your VT12 (www.
mackie.com). Use the Firmware Updater button to load
the new firmware into the VT12. Complete instructions
for updating the firmware will be included with the new
firmware file.
Cancel: Click this button to close the File dialog box.
Installing Tracktion
Your VT12 also came with Tracktion, our easy-to-use
multitrack recording and sequencing software for the
PC and Mac.
Note: After installing Tracktion, be sure to check our
website periodically for software updates
(www.mackie.com).
To install Tracktion on a PC running Windows XP:
1. Insert the Tracktion CD-R or DVD-R into the CD or
DVD drive.
2. Browse to the CD or DVD directory and open the
"Tracktion" folder. You can copy the folder called
"Tracktion Documentation" to your hard drive if you
like, to make it easier to access.
3. Double-click the file "TracktionSetup.exe".
4. Follow the instructions in the Tracktion Installer to
complete the installation.
4
hotwire VT1
To install Tracktion on a Mac running OS X
(version 10.3.9 or later):
1. Insert the CD-R or DVD-R into the CD or DVD drive.
2. Double-click the CD or DVD icon on the desktop
and double-click the file named "TracktionSetup.
dmg".
3. A Tracktion window opens. Drag the Tracktion icon
from the Tracktion window into the Applications
folder.
4. Double-click the Tracktion file in the Applications
folder to open Tracktion.
Authorizing Tracktion
There is an authorization code on the sleeve of the
Tracktion CD-R or DVD-R that came with your VT12. You
can authorize the software from within Tracktion or by
going to http://my.mackie.com.
Advertisement
Table of Contents
