Saving Your Own - Mackie hotwire VT12 Owner's Manual

BANK CLEAN CRUNCH OVERDRIVE LEAD
11 Acoustic Electric
Chorus Chorus
12 Coffee Jazz +
House Vocal
13 Hi Fi Class A
Shimmer Crunch
14 Nash-V Petite
Twang Blonde
15 Cool Vintage
Jazz Trem
16 Silver Texas
Surfer Blues
17 Phase Rotary
One Club
18 Choral Tiny
Chime Tweed
19 Jazz Boutique
Hall Class A
20 Natural Black
Acoustic Mask
21 Acoustic Bayou
Electric Blues
22 Bright Acoustic
Acoustic Mod Dly
23 Acoustic Electric
Chorus Chorus
24 Coffee Jazz +
House Vocal
Once you have recalled a preset, you can change any
of the settings by simply turning a knob or pressing a
button. If you don't like the changes that you made and
want to return to the original preset, simply press the
channel button for that preset and the settings will be
recalled once again.
Tweedy Live
Bird Lead
Blues + Keyboard
Vocal Line In
UK Rock Brown
Rhythm Candy
Two So' Cal
Scoops Solo
Class A Boogey
Drive Man
Plexi Purple
Plate Serpent
Brighton UK
Bite Solo
UK Let 'er
Blues Rip
Unchain Stinger
Flange Solo
Diamond Big
Plate Lead
Class A Rock-A-
Grit Billy
Sizzle + Shred
Steak Solo
Tweedy Live
Bird Lead
Blues + Keyboard
Vocal Line In

Saving Your Own

If you have made changes to a preset and want to
overwrite the original preset, simply press and hold the
SAVE button [31] for two seconds. The message "Save
Complete" will appear in the display when the new set-
tings have been saved to memory.
Notice that banks 13-24 are duplicates of banks 1-12.
When overwriting or creating new presets, use banks 13
-24 since they are duplicated in banks 1-12.
If you do overwrite one or more presets in banks 1-12
and want to revert to the original factory presets, press
and hold the "MIC" and "TOOLS" buttons when powering
up the VT12. This restores the original factory presets in
banks 1-12. This doesn't affect banks 13-24, so it won't
erase the presets you have stored there.
To create and save a new preset:
1. Press and release the Save button [31].
2. "Save to Bank" appears in the display. Rotate the
Select/Adjust knob [22] until the desired bank ap-
pears in the display.
3. Press the Select/Adjust knob to select the bank.
4. "Save to Channel" appears in the display. Rotate the
Select Adjust knob until the desire channel appears
in the display.
5. Press the Select/Adjust knob to select the channel.
6. "Save to Name" appears in the display. Rotate the
Select/Adjust knob until the first letter of the name
appears in the display. Press the Select/Adjust knob
to move on to the next letter. Repeat the process
until you have selected every letter in the name
(you can select blank spaces and numbers as well,
with up to 8 characters in each line of the name).
7. Press the SAVE button to complete the operation.
Note: You can save all the presets to your computer's
hard drive and recall them later using the FILE button
in the VT12 Control Panel. See page 22 for more info.
Owner's Manual
19