Using The Heart Rate Monitor - Garmin FR60 Owner's Manual

1. Plug the USB ANT Stick into
an available USB port on your
computer.
2. Bring your FR60 within range
(5 m) of your computer.
nOTE: If Power Save Transfer is
activated, your FR60 must be in
regular time mode to transfer data
to your computer. See
3. Follow the on-screen instructions.
Using the Heart Rate
Monitor
The heart rate monitor is on standby
and ready to send data. Wear the
heart rate monitor directly on your
skin, just below your breastplate.
It should be snug enough to stay in
place during your activity.
FR60 Owner's Manual
Tab
Slot
page 24.
1. Push one tab on the strap through
2. Wet both electrodes on the back
3. Wrap the strap around your chest
Heart Rate Monitor Strap
Heart Rate Monitor (Front)
Electrodes
Heart Rate Monitor (Back)
the slot in the heart rate monitor.
Press the tab down.
of the heart rate monitor to create
a strong connection between your
chest and the transmitter.
and attach it to the other side of
the heart rate monitor.
nOTE: The Garmin logo should
be right-side up.
Getting Started