Going For A Run; Downloading Free Software; Sending Workout Data To Your Computer - Garmin FR60 Owner's Manual

Getting Started
resuming your activity, you must
reestablish the connection with the
FR60.
To reestablish the connection
Make sure accessory is active. Stop
and restart the training session
OR
Press MODE and cycle out of
training mode and then back into
training mode.
For instructions on using the
heart rate monitor, see
instructions on using the foot pod,
see page 8.
For information about purchasing
additional accessories, go to
http://buy.garmin.com.

Going for a Run

MODE
1. Press
page.
2. Press START
6
page 7. For
to view the training
to start the timer.
3. After
completing
your run, press
STOP.
4. Press and hold
LAP to save
your activity
and reset the
timer.
Downloading Free
Software
1. Go to www.garmin.com/FR60
/owners.
2. Follow the on-screen instructions.
Sending Workout Data
to Your Computer
nOTE: You must download
software as instructed so that
the necessary USB drivers are
installed before connecting the
USB ANT Stick to your computer.
FR60 Owner's Manual