Depth Digital Display; Installing/Removing Tooling - Grizzly G0751 Owner's Manual

Depth Digital Display

the depth digital display on the headstock dis-
plays the relative spindle depth.
Use Figure 19 and the following descriptions to
gain an understanding of the display controls.
F
e
d
Figure 19. depth digital display controls.
A. OFF button
b. ON/0 button: turns display ON. When the
display is on, zeros the display.
C. battery Compartment: holds the Cr2032
3V lithium cell battery that powers the unit.
D. Up/Down buttons: adjusts the display read-
ing when pressed.
E. In/mm button: alternates the display
between inch and millimeter measurements.
F. LED Digital Display
-26-
a
B
C
Installing/Removing
Tooling
the Model g0751 includes the following spindle
tools (see Figure 20):
A. b16 Drill Chuck w/R-8 Arbor: Use with drill
bits.
b. R-8–MT#3 Spindle Sleeve: Use with Mt#3
tooling with or without a tang. has a drift key
slot for tool removal.
C. MT#3–MT#2 Spindle Sleeve: Use with the
r-8–Mt#3 spindle sleeve for Mt#2 tooling.
has a drift key slot for tool removal.
alignment slot
a
B
Figure 20. drill chuck and arbors included with
Model g0751.
Cutting tools are sharp and
can easily cause laceration
injuries. Always protect
your hands with leather
gloves or shop rags when
handling cutting tools.
Model G0751 (Mfg. Since 1/13)
drift Key slot
C