Grizzly G0751 Owner's Manual page 7

M
s
r
Figure 2. headstock right-side controls.
M. Auto-Downfeed ON/OFF Knob: turns drill-
ing/milling auto-downfeed on/oFF.
N. Auto-Downfeed Rate Selector Knob:
selects one of three auto-downfeed rates—
0.004, 0.007, or 0.010 inches of spindle travel
per revolution.
To prevent damage to the gears, ONLY use
the auto-downfeed ON/OFF and rate selec-
tor knobs when the spindle is completely
stopped.
Model G0751 (Mfg. Since 1/13)
n
o
p
Q
O. Depth Graduated Dial: Limits spindle travel
in manual or auto-downfeed mode. two
adjustable limit stops limit travel in tapping
mode.
P. Tapping Limit Switches: reverses/stops
spindle travel when the graduated dial limit
stops make contact with the switch.
Q. Coarse Handle Lock-Down Thumb Screw:
Locks down the coarse downfeed handles
to enable spindle travel for coarse downfeed
control or tapping mode.
R. Depth Graduated Dial Lock Handle: Locks
the depth graduated dial to the coarse
downfeed hub when limiting spindle depth.
S. Coarse Downfeed Handle: allows spin-
dle travel in large amounts. When locked
toward the headstock, enables manual
coarse downfeed and tapping mode. When
moved away from the headstock, enables
fine downfeed control and auto-downfeed.
-5-