Table of Contents
Advertisement
5. I NS TALLAT IO N
1. Attach the Low Profi le Dome on the ceiling using the screws provided. Considering the camera
angle required for the viewing angle.
2. Adjust the Lens Angle to the desired location.
3. Connect the Service Video Output Cable and check the video image. Change the Settings accordingly
using the OSD Controller.
4. After adjusting the Lens, install the Top Cover.
TOP HOUSING
(Assembly direction)
(Plastic Dome)
TAPPING SCREW (4 x 20L) - 3EA
SERVICE VIDEO TEST CABLE
<TILT ANGLE : 20~90°>
TILT: +90°
ASSEMBLY HOOK
(2 point)
TOP HOUSING
(Direction of Separation)
OSD CONTROLLER
<PAN ANGLE : ±10°>
TILT: 0°
TILT: +20°
PAN: ±10°
PAN: 0°
M4 STAR SCREW
10
L-WRENCH(T-20)
Advertisement
Table of Contents
