Related Manuals for EverFocus EHD700A Ultra 720+
Summary of Contents for EverFocus EHD700A Ultra 720+
- Page 1 EHD700A / 730A Ultra 720+ Series Day/Night Vandal Dome Camera User’s Manual Copyright © EverFocus Electronics Corp, Release Date: January., 2014...
- Page 2 Precautions Do not install the camera near electric or magnetic fields. Install the camera away from TV/radio transmitters, magnets, electric motors, transformers and audio speakers since the electromagnetic fields generated from these devices may distort the video image or otherwise interfere with camera operation. Never disassemble the camera beyond the recommendations in this manual nor introduce materials other than those recommended herein.
-
Page 3: Conditions
Safety Notice Federal Communication Commission Interference Statement This equipment has been tested and found to comply with the limits for a Class A digital device, pursuant to Part 15 of the FCC Rules. These limits are designed to provide reasonable protection against harmful interference in a residential installation. -
Page 4: Table Of Contents
Contents 1. INTRODUCTION ..................5 ..................... 6 ACKING ......................6 EATURES 2. CABLE DESCRIPTION................7 3. INSTALLATION ..................8 ................8 NSTALLATION AND DJUSTMENT 4. CONFIGURATION IN THE OSD MENU ..........12 5. SPECIFICATIONS ................15... -
Page 5: Introduction
To take full advantage of the amazing resolution available from this advanced imaging technology, the EverFocus Ultra Series EHD700A uses a varifocal lens together with SONY Exview HAD 960H CCD II to produce in excess of 720 horizontal TV lines of resolution from each and Ultra Series 720+ camera we deliver. -
Page 6: Packing List
EHD700A/730A Ultra 720+ TVL Vandal Dome Camera 1.1 Packing List Camera Body x 1 Screw x 4 User Manual x 1 Screwdriver x 1 Test Lead x 1 Plastic Anchor x 4 Template Plate x 1 DC Power Pigtail Cable x 1 ... -
Page 7: Cable Description
EHD700A/730A Ultra 720+ TVL Vandal Dome Camera 2. Cable Description Name Descriptions Power Cable Connects to a 12VDC or 24VAC power source. Connects to a DVR or monitor, using a 75 Ohm BNC-type Video Output coaxial cable. Test Lead Connects to a monitor for setting image aim and focus. Optional power pigtail cable. -
Page 8: Installation
EHD700A/730A Ultra 720+ TVL Vandal Dome Camera 3. Installation 3.1 Installation and Adjustment To remove the Cover Cap, unscrew the three Set Screws using the supplied Hexagon Wrench. For Ceiling Mount / Wall Mount users: Stick the template plate on the position where you want to attach the camera, drill the four holes on the template plate for screwing the Adapter Plate with the supplied screws and anchors. - Page 9 EHD700A/730A Ultra 720+ TVL Vandal Dome Camera To screw the camera onto a Wiring Box or using a Bracket: a. You can optionally screw the camera to the wall using an L-Shaped Mounting Bracket. b. Screw the supplied Adapter Plate to the Wiring Box or the L-Shaped Mounting Bracket using the screw holes on the Adapter Plate.
- Page 10 EHD700A/730A Ultra 720+ TVL Vandal Dome Camera Screw the camera to the Adapter Plate. Connect the camera to the 12VDC or 24VAC power source using the supplied DC power pigtail cable or a power adapter.
- Page 11 EHD700A/730A Ultra 720+ TVL Vandal Dome Camera Connect the camera to a DVR or a portable monitor using the Test lead for viewing the camera view while adjusting camera angles. You can also use the OSD Menu Joystick to configure camera settings. a.
-
Page 12: Configuration In The Osd Menu
EHD700A/730A Ultra 720+ TVL Vandal Dome Camera Screw back the Cover Cap Set Screw using the supplied Hexagon Wrench. 4. Configuration in the OSD Menu You can use the Joystick on the rear panel of the camera to configure camera settings in the OSD menu. - Page 13 EHD700A/730A Ultra 720+ TVL Vandal Dome Camera 0-255 (default=28) <EHD730A> Mode AGC*, Off Luminance Brightness x0.25, x0.50*, x0.75, x1.00 Mode Shut+AGC 1/60*, 1/100, 1/250, 1/500, 1/1000, 1/2000, Shutter Manual 1/4000, 1/10000 6.00*, 12.00, 18.00, 24.00, 30.00, 36.00, 42.00, 44.80 Speed 0-255 (default=239) Delay CNT 0-255 (default=16)
- Page 14 EHD700A/730A Ultra 720+ TVL Vandal Dome Camera Off* Area 1/8*, 2/8, 3/8, 4/8,5/8, 6/8, 7/8, 8/8 Select Top / Botto 0-244 (default=0) Privacy Left / 0-474 (default=0) Right Color 1-8 (default=1) Transp 0.00, 0.50, 0.75, *1.00 arent Mosaic *Off / On EXT1*<EHD730A>...
-
Page 15: Specifications
EHD700A/730A Ultra 720+ TVL Vandal Dome Camera 5. Specifications EHD700A EHD730A Pickup Device 1/3” Sony Exview HAD II 960H High Sensitivity Interline CCD Video Format NTSC or PAL Picture Elements 1020 x 508 (NTSC) /1020 x 596 (PAL) Effective Pixels 976 x 494 (NTSC) / 976 x 582 (PAL) Scanning System 2:1 Interlace... - Page 16 EHD700A/730A Ultra 720+ TVL Vandal Dome Camera 24VAC:4W max. 5W max . 24VAC:9.5W max. 12VDC:420mA, Heater 12VDC:170mA ,2.5Wmax. IR on 5.5W max . 24VAC:5.5W max. Heater on 24VAC:11W max. Operating Temperature -40°C~50°C / -40°F~122°F Humidity Less than 80% Dimensions 140 x 102.5mm / 5.51" x 4.04" Weight 2.07lbs /940g 2.25lbs /1020g...
- Page 17 EverFocus USA - California: EverFocus USA - New York: 1801 Highland Avenue, Unit A, Duarte, CA 91010, 415 Oser Avenue, Unit S, Hauppauge, NY 11788, USA TEL: +1 631 436 5070 TEL: +1 626 844 8888...