Configuring Other Vessels - Garmin GPSMAP 4212 Owner's Manual

Gpsmap 4000 series
Hide thumbs Also See for GPSMAP 4212:
Table of Contents

Advertisement

Configuring the Device
To adjust the Keel Offset:
1. From the Home screen, select
2. Using the on-screen keyboard, enter the measured distance from the transducer location to the
water line or to the keel of the boat.
If you are measuring down to the keel (transducer installed at the water line), enter a (+)
positive number. This shows the depth at the bottom of the keel.
If you are measuring up to the water line (transducer installed on the bottom of the keel), enter
a (-) negative number. This shows the depth at the surface.
3. Select an option:
Select
Done
to accept the number.
Select
Cancel
to cancel your changes and return to the My Boat screen.
shows depth at the surface.

Configuring Other Vessels

NOTE: To configure AIS or DSC information for other boats, your chartplotter must be connected to an
external Automatic Identification System (AIS) or Digital Selective Calling (DSC) device.
From the Home screen, select
aiS—turn AIS on or off. AIS alerts you to area traffic by providing boat IDs, position, course, and
speed for boats equipped with a transponder.
DSC—turn DSC on or off.
Collision alarm (AIS and MARPA only)—turn a safe zone around your boat on or off. This is used
for collision avoidance, and can be customized.
To customize safe-zone settings:
1. From the Home screen, select
2. Select one or both of the following options:
Select Range to change the measured radius of the safe-zone ring to a specified distance,
from 500 ft. to 2.0 nm (or from 150 m to 3.0 km, or from 500 ft. to 2.0 mi.).
Select Time To (Safe Zone) to sound an alarm if Automatic Identification System (AIS) or Mini
Automatic Radar Plotting Aid (MARPA) determines that a target will intersect the Safe Zone
within the defined time interval (ranging from 1 to 24 minutes).
40
Configure
>
My Boat
Transducer at the water line
A (+) positive number
shows depth at the bottom
of the keel.
Transducer at the bottom of
the keel
A (-) negative number
Configure
>
Other
Configure
>
Other Vessels
>
Keel
Offset.
Keel Offset
Vessels.
>
Collision
GPSMAP 4000 Series Owner's Manual
Alarm.

Hide quick links:

Advertisement

Table of Contents
loading

This manual is also suitable for:

Gpsmap 4208Gpsmap 4210

Table of Contents