Viewing The Dsc List - Garmin GPSMAP 4212 Owner's Manual

Viewing Information
To transfer waypoints, routes, and tracks to or from a network:
1. Connect the chartplotter to a Garmin Marine Network using the network port on the back of the
chartplotter and a Garmin Network cable.
2. From the Home screen, select
3. Select an option to indicate how data is handled:
• Select Clone User Data
the network. Existing data will be overwritten on those chartplotters.
• Select Merge User Data
network. Unique data will be combined with existing data on every chartplotter.
To back up data to a computer:
1. Insert an SD card into the SD card slot on the front of the chartplotter.
2. From the Home screen, select
Card.
3. Complete one of the following actions to indicate the name of the file to be backed up:
• Select the file name from the list.
• Select Add New File
Keypad (GPSMAP 4210 or 4212 only), and select Done.
4. Select Save To Card. The file name is saved with an .ADM extension.
5. Remove the SD card from the chartplotter and insert it into an SD card reader attached to a
computer.
6. From Windows Explorer, open the Garmin\UserData folder on the SD card.
®
7. Copy the backup file on the card and paste it to any location on the computer.
To restore backup data to your chartplotter:
1. Copy a backup file from the computer to an SD card in the Garmin\UserData folder.
2. Insert the SD card into your chartplotter.
3. From the Home screen on your chartplotter, select
Card > Replace From
To delete all waypoints, routes, and tracks:
1. From the Home screen on your chartplotter, select
2. Select Waypoints, Routes,
3. Select OK or Cancel.

Viewing the DSC List

NOTE: Your chartplotter must be connected to a VHF radio that supports Digital Selective Calling
(DSC) in order to view the DSC list.
The DSC list is a log of the most-recent DSC calls and other DSC contacts you have entered. The
DSC list can contain up to 100 entries.
The DSC list shows the most-recent call from a boat. If a second call is received from the same boat,
it replaces the first call in the Call List. For more information on DSC, see
From the Home screen, select
32
Information > User Data
to transfer data from the device to other chartplotters connected to
to transfer data between all the chartplotters connected to the
Information User Data
>
to create a new file, enter the file name using the
Card.
Saved Tracks, or All.
Information > DSC
> Data Transfer
Data Transfer
>
Information User Data
>
Information > User Data
page
List.
GPSMAP 4000 Series Owner's Manual
> Network.
Card Save to
> >
Rocker or Numeric
Data Transfer
> >
> Clear User Data.
54.