Using Xm Audio - Garmin GPSMAP 4212 Owner's Manual

Using XM Audio

When a Garmin XM Audio receiver is connected to the Garmin Marine Network and to the audio
input of your boat, you can listen to XM Audio channels.
To display the XM Audio interface while navigating:
From the Navigation screen, select
To select an XM Audio channel:
Select the right or left channel select arrows to change to the next channel in the current
category.
To use the XM Audio Guide:
While the XM audio interface is displayed on the Navigation chart, press the bottom soft key.
Channel Guide—selects the specific XM channel within the currently selected category.
Channel Entry—allows you to enter a channel using the screen keyboard.
Save Preset—saves the current XM channel in the Presets list. Select
current channel from the list. Presets is displayed as a category in the category list.
Category—selects the category of channels that are displayed in the Channel Guide.
Mute—silences the audio.
GPSMAP 4000 Series Owner's Manual
Menu > Data Bars > XM Audio
Using XM
> On.
Delete Preset to remove the