Viewing Engine Gauges; Viewing Fuel Gauges - Garmin GPSMAP 4212 Owner's Manual

Viewing Engine Gauges

NOTE: You must be connected to a NMEA 2000 network capable of sensing engine data in order to
view the gauges. See the GPSMAP 4000/5000 Series Installation Instructions for details.
From the Home screen, select
To select analog or digital gauges:
NOTE: For more than two engines, you can use only the digital gauges. For one or two engines, you
can switch between analog and digital gauges.
1. From the Home screen, select
MENU.
Digital or Analog.
2. Select

Viewing Fuel Gauges

NOTE: To view fuel information, your chartplotter must be connected to an external fuel sensor, such as
the Garmin GFS 10.
™
From the Home screen, select
engine, total fuel flow, fuel level in each tank, total fuel remaining, fuel economy, engine trim, boat
speed, engine RPM, and the range for your boat are displayed.
To synchronize your fuel gauges with your fuel:
1. From the Home screen, select
2. Press MENU.
3. Select an option:
• Fill Up All Tanks—select when your tank is full. An estimate of the total fuel is shown. Adjust
if necessary.
• Add Fuel To Boat—select when you have added less than a full tank. An estimate of the fuel
added is shown. Adjust if necessary.
• Set Total Fuel Onboard—select to specify the total fuel in your tanks.
• Fuel Economy—select either
for the fuel economy calculation.
GPSMAP 4000 Series Owner's Manual
Information > Engine.
Information > Dashboard Gauges
Information Dashboard Gauges
>
Information > Dashboard Gauges
GPS Speed or Water Speed
Viewing Information
> Engine and then press
> Fuel. Fuel flow for each
> Fuel.
(using data from a speed wheel)
33