Creating And Using Waypoints - Garmin GPSMAP 4212 Owner's Manual

Creating and Using Waypoints

You can store up to 1,500 waypoints with a user-defined name, symbol, depth, and water
temperature for each waypoint.
To mark your current location as a waypoint:
From any screen, press the
seconds.
—
• Edit Waypoint
a comment about the waypoint.
—
• Delete delete the waypoint.
—
• Move change the location of the waypoint, either by selecting a different location on the map
or by entering grid coordinates.
—
• Man Overboard
• Next Page/Previous Page
To create a new waypoint:
1. From the Home screen, select
2. By pressing the Rocker, use the map pointer (
a waypoint.
3. Select Create Waypoint.
NOTE: Pressing MaRK
To mark a Man Overboard location:
When you mark a waypoint, you can designate it as a Man Overboard (MOB) waypoint. This marks
the point and sets a course back to the marked location. When an MOB is active, an MOB waypoint
with an international MOB symbol is created, and the chartplotter begins active navigation to that
point.
1. From any screen, press the
2. Select Man Overboard.
GPSMAP 4000 Series Owner's Manual
MARK key. The waypoint information screen displays for a few
designate a specific name, symbol, water depth, water temperature, or make
designate the current location as a Man Overboard location.
—
switch between waypoint information and the navigation chart.
Charts > Navigation
only creates a waypoint at your present location.
MARK key.
Chart.
) to select the location you want to designate as
Where To?
2