Viewing Information
Viewing Video
Your chartplotter can display video if you connect to one or more video sources using the supplied
video cable. See the GPSMAP 4000/5000 Series Installation Instructions for details.
1. From the Home screen, select
2. Select
Menu
to set up the following:
•
Source—selects the video device (Video 1 or Video 2) that will display the video. If you have
two video sources and wish to alternate between the two, select
amount of time each video is displayed.
•
Aspect—switches between the standard aspect ratio and a stretched aspect ratio. The video
cannot be stretched beyond the dimensions provided by the connected video device, and may
not fill the entire screen of the GPSMAP 4212 chartplotter.
•
Brightness—adjusts the brightness of the video feed up or down. Select
device to automatically adjust the brightness.
•
Saturation—adjusts the color saturation up or down. Select
automatically adjust the saturation.
•
Contrast— adjusts the contrast up or down. Select
adjust the contrast.
•
Standard—selects the video format used by the source (PAL or NTSC). Select
device automatically select the source format.
34
Information
> Video.
Alternate
to define the
Auto
Auto
to allow the device to
Auto
to allow the device to automatically
GPSMAP 4000 Series Owner's Manual
to allow the
Auto
to let the