Performing Self-Test And Calibration - Agilent Technologies Infiniium 90000 A Service Manual

Performing Self-Test and Calibration

Perform self tests
1
a Pull down the Utilities menu and select Self Test.
b Select Scope Self Test from the Self Test list.
c Click on Start Self Test to start the self test procedure.
If any of the self-tests fail, ensure that the failure is diagnosed and repaired before
calibrating and testing performance.
Perform calibration. See "To run the self calibration" on page 15.
2
Chapter 3: Testing Performance

Performing Self-Test and Calibration

19