Winding On The Hook Thread - Duerkopp Adler 550-867 Operating Instructions Manual

5.5

Winding on the hook thread

3 2
6 5
ATTENTION!
Only use bobbins that are specially designed for this machine type!
–
Put the hook thread cone on the thread stand.
–
Conduct the hook thread through the threading guide on the
unwinder arm and through the tube 1.
–
Conduct the thread counter-clockwise around the tensioner 3.
–
Conduct the thread through threading guide 2 to the bobbin 4.
–
Pull the thread beginning behind the tear-off knife 6 and tear it off.
–
Swivel the winder lever 5 against the empty bobbin.
–
Enter the number of the bobbin via touch screen on the monitor.
4
When the bobbin is filled, the winding will be automatically
stopped by the winder lever 5.
Caution!
Please make sure that the entered number corresponds to the
bobbin number before actuating the "Return" key.
1
"Return"
15