Designated Use; Optional Equipment - Duerkopp Adler 550-867 Operating Instructions Manual

2

Designated Use

3

Optional equipment

8
The class 550-867 is an configured sewing station designed for the
sewing of light to medium-heavy material. Such material is generally
made of textile fibers, but it may also be leather.
These materials are used in the clothing industry and for domestic and
motor-vehicle upholstery.
It is also possible to produce so-called technical seams with this
configured sewing station. In this case, however, the operator must
assess the possible dangers which may arise (DÜRKOPP ADLER AG
would be happy to assist with this assessment), since such
applications are on the one hand relatively unusual and, on the other,
so varied that no single set of criteria can cover them all. The outcome
of this assessment may require to take appropriate safety measures.
Generally only dry material may be sewn with this sewing machine.
The material must not be thicker than 10 mm when compressed by the
lowered sewing feet. The material may not contain any hard objects.
Otherwise the machine may only be operated with an eye-protection
device. Such an eye-protection device is currently not available.
The seam is commonly sewn with sewing threads made from textile
fibers of the dimensions up to 11 / 3 NeB (cotton threads), 11 / 3 Nm
(synthetic threads) or 11 / 4 Nm (core threads). If other types of thread
are to be used, the possible dangers arising from it have to be
assessed and, if necessary, safety measures have to be taken.
This configured sewing station may be set up and operated only in
dry, well-maintained premises. If the sewing unit is used in premises
which are not dry and well-maintained, it may be necessary to take
further precautions which should be agreed in advance (see
EN 60204-31:1999).
As manufacturers of industrial sewing machines we proceed on the
assumption that personnel that works on our products will have
received training at least sufficient to acquaint them with all normal
operations and with any hazards which these may involve.
For the class 550-867 the following optional equipment is available:
Order-No. Optional equipment
9800 330010 Control panel V 820
0867 590724 Head cover scanner incl. holder to check the endlabel
0867 590904 Scanner with holder (2x) to enter the needle- and hook
thread cone bar codes
0867 590924 Scanner (2x) for the bobbin monitoring via barcode on
the bobbin winder and hook
0867 590014 Needle cooling NK 20-1
0867 590054 Needle cooling NK 20-5