General; Installing The Sewing Unit; Shipping Braces - Duerkopp Adler 550-867 Operating Instructions Manual

2

General

3

Installing the sewing unit

3.1 Shipping braces

3.2 Transport inside the factory hall
1
ATTENTION!
The engineered sewing station must be set up by trained specialist
personnel only.
All work on the electrical equipment of this special sewing unit may
only be carried out by qualified electricians or other appropriately
trained persons.
The mains plug has to be unplugged.
The adjoined manuals of the step motors' manufacturer have to be
headed in any case.
Before installing the sewing unit the securing devices have to be
removed.
–
Remove the safety straps and battens on the machine head, table
and stand.
1
For the transport inside the factory hall the stand is equipped with 4
castors.
Moving the sewing unit
–
For the transport release the brakes 2 on the four castors 1.
–
After the transport lock the brakes 2 on the four castors 1 again.
1 2
3