Drpd; [Ring Pattern] - Olivetti d-COLOR MF3000 Operation Manual

DRPD

Select this mode when using DRPD (Distinctive Ring Pattern Detection).
If the receiver rings with the pattern selected from the four ring patterns avail-
able, the incoming call is automatically received as a fax.
In order to use DRPD, the following settings in the [Fax Settings] screen
([Admin Settings]) must be specified.
Set [Comm. Settings] - [RX Mode] to [DRPD].
With [Comm. Settings] - [Ring Pattern], select the ring pattern for faxing.
For details on the settings, refer to "[Comm. Settings]" on page 2-10.

[Ring Pattern]

Refer to the following table and select the ring pattern.
Settings
[Normal Ring]
[Double]
[Triple 1]
[Triple 2]
S-ON (Short-ON): On for 150 ms to 600 ms
L-ON (Long-ON): On for more than 600 ms
S-OFF (Short-OFF): Off for 100 ms to 1,200 ms
L-OFF (Long-OFF): Off for more than 1,200 ms
4-4
Ring Pattern
L-ON + L-OFF
L-ON + S-OFF + L-ON + L-OFF
S-ON + S-OFF + L-ON + S-OFF + S-ON + L-OFF
S-ON + S-OFF + S-ON + S-OFF + L-ON + L-OFF
Receiving G3 faxes