Alarms Tab; Using The Alarms Tab - Garmin GPSMAP 276C Owner's Manual
Garmin chartplotting receiver owners manual gpsmap 276c
Hide thumbs
Also See for GPSMAP 276C:
- Owner's manual (136 pages) ,
- Quick reference manual (2 pages) ,
- Declaration of conformity (1 page)
Table of Contents
Advertisement
Main Menu
Alarms Tab
Alarms Tab: 'Nav' tab
70
Using the Alarms Tab
The Alarms Tab of the Main Menu allows you to defi ne alarm settings.
To access the Alarms Tab of the Main Menu:
1. Press
MENU
twice to open the Main Menu.
2. Highlight 'Alarms' from the vertical list of tabs using the
To set an alarm:
1. Press
twice to open the Main Menu.
MENU
2. Use the
ARROW KEYPAD
to open the Alarms Tab.
3. Use the
to highlight the fi eld to the right of the alarm name you wish activate and
ARROW KEYPAD
press
.
ENTER/MARK
4. Change the mode to 'On' (Dist or Time for the 'Arrival' alarm) and press
5. Highlight the next fi eld to the right and press
ENTER/MARK
to fi nish.
When an alarm goes off, the alarm message appears on the display and the unit emits fi ve (5) beeps.
When you select an alarm to be persistent, the alarm message appears on the display and the unit beeps
until you press ENTER/MARK to acknowledge the alarm.
To set a persistent alarm:
1. Press
twice to open the Main Menu.
MENU
2. Use the
ARROW KEYPAD
to open the Alarms Tab.
3. Use the
to highlight the box next to the alarm you would like to make persistent
ARROW KEYPAD
(for example, 'Anchor Drag').
4. Press
to place a check mark in the 'Persist' box. When an alarm goes off, it sounds
ENTER/MARK
until you acknowledge the alarm message by pressing
.
ARROW KEYPAD
ENTER/MARK
ENTER/MARK
, then enter the desired settings and press
ENTER/MARK.
.
Advertisement
Table of Contents
