Garmin GPSMAP 276C Owner's Manual page 43

Garmin chartplotting receiver owners manual gpsmap 276c
Hide thumbs Also See for GPSMAP 276C:
Table of Contents

Advertisement

To delete waypoints by distance:
1. From the 'User' tab, highlight the waypoint to be deleted and press
2. Highlight 'Delete By Distance' and press
3. Select 'Less Than' or 'More Than' and enter the desired distance using the
4. If desired, you can select a waypoint or point of interest as the 'From' location. Highlight the 'From'
fi eld and press
. From the Find Menu, select the desired location and press
ENTER/MARK
. When 'OK' is highlighted, press
MARK
5. Highlight 'Delete' and press
ENTER/MARK
'Cancel' or press
to stop the deletion.
QUIT
To delete all user waypoints:
1. Press the
MENU
key to select the options window.
2. Use the
to highlight 'Delete All' and then press
ARROW KEYPAD
3. Highlight the 'OK' prompt and press
waypoints before you press
ENTER/MARK.
4. You will then be asked if you would like to delete all Route Waypoints too. Highlight the 'OK' prompt
and press
to confi rm or highlight 'Cancel' and press
ENTER/MARK
waypoints. Selecting 'Cancel' at this time will not cancel out of the waypoint deletion. It simply
retains waypoints used in routes.
NOTE:
Once a waypoint is deleted from the list, it cannot be recovered from the unit. It is
advisable to backup important waypoints to a computer using the optional PC cable and inter-
face software or write them down by hand.
MENU
ENTER/MARK
.
ENTER/MARK.
to delete all waypoints within the set location. Choose
ENTER/MARK
to confi rm. Be sure you want to delete the
ENTER/MARK
You cannot recover deleted waypoints.
ENTER/MARK
.
.
ARROW KEYPAD
ENTER/
.
to not delete Route
Basic Operation
Using Waypoints
User Points Options Menu
Deleting waypoints based on distance
37

Advertisement

Table of Contents
loading

Table of Contents