Alarms Tab - Garmin GPSMAP 376C Owner's Manual

M M > A T
AIN ENU LARMS AB

Alarms Tab

Use the Alarms tab to define alarm settings. When an alarm goes off,
the alarm message appears on the GPS 376C and the unit emits five
(5) beeps.
Main Menu—Alarms tab
To set an alarm:
1. Highlight the Alarms tab on the Main Menu.
2. Select an alarm to set, and press ENTER.
3. Change the setting to On, and press ENTER. If necessary,
highlight the next field to the right, and press ENTER. Enter
the settings you want.
4. Press ENTER to finish.
When you set an alarm to be persistent, the alarm message appears
on the screen and the GPSMAP 376C beeps until you press ENTER
to acknowledge the alarm.
76
190-00508-00_0C.indd 76
To set a persistent alarm:
1. Highlight the Alarms tab on the Main Menu.
2. Highlight the box next to the alarm you want to make
persistent.
3. Press ENTER to place a check mark in the Persist box.
Navigation (Nav) Alarms
Next Turn—sets an alarm to indicate the next turn in a route. Select
Dist to specify a distance before you reach the next turn to sound the
alarm. Select Time to specify a time before the turn for the alarm to
go off. Select Auto for the unit to provide a Next Turn alarm at its
discretion.
Arrival—sets an alarm to sound when you are a specified distance
or time away from a destination waypoint. Select Auto for the unit
to provide an Arrival alarm at its discretion.
Off Course—sets an alarm to sound when off course. Select On,
then enter a distance.
Anchor Drag—sets an alarm to sound when you exceed a specified
drift distance. Select On, and then enter a distance.
GPSMAP 376C Owner's Manual
11/6/2006 9:47:37 AM