Using Routes; Creating A Route - Garmin GPSMAP 276C Owner's Manual

Creating a Route

The Garmin GPSMAP 276C lets you create and store up to 50 reversible routes, with up to 300
waypoints each. Routes can be created in two ways. The fi rst way is to select waypoints from the
Find Menu, allowing you to see a list of the route points as you create the route. The second way is by
selecting waypoints or map items from the Map Page, allowing you to see each route point graphically
on-screen as you create the route.
To create a route using the Find Menu:
1. Press the key twice to display the Main Menu page.
MENU
2. Use the to highlight 'Route' from the vertical list of tabs.
ARROW KEYPAD
3. Press the MENU key to display the Route Options Menu. Select 'New Route' and press
MARK .
Or Highlight the fi rst available blank route slot and press
4. The Route Review Page automatically opens, displaying a blank route. Press
items to add to the route.
5. The Find Menu opens. Using the methods discussed in the "Finding an Item" section of this manual,
select waypoints and/or points of interest to add to your route. When the item information page is
open, highlight 'OK' and press
added all of the points to the route.
ENTER/MARK
to add the point to the route. Repeat until you have
ENTER/MARK
ENTER/
.
to fi nd
ENTER/MARK
Basic Operation

Using Routes

Creating a new route
Creating a new route on Route Review Page
23