Navigate Route; Navigate Track (Tracback Navigation); Edit Vias - Garmin GPSMAP 276C Owner's Manual

Basic Operation
Navigating in Automotive
Mode
Add/Edit Vias Page
Add/Edit Vias Page
showing a via point before the destination
22

Navigate Route

The 'Navigate Route' option allows you to easily select a route from a list. Refer to the 'Navigating in
Marine Mode" section previously found in this manual. Also refer to the "Using Routes" section.
Navigate Track ( TracBack Navigation)
The TracBack function allows you to retrace your path using the track log automatically stored in the
receiver' s memory, which eliminates the need to store waypoints along the way. Refer to the 'Navigating
in Marine Mode" section previously found in this manual. Also refer to the "Track Tab" section for more
information on setting up the Track options and saved tracks.

Edit Vias

You can add via points (points through which you would like to travel) to your route using the 'Edit
Vias' option. Via points are great for adding a stop at the gas station or bank to your route. They are
really helpful when planning a long trip.
To add via points to your route:
1. While navigating your route, press the
2. Use the
ARROW KEYPAD
3. From the pop-up window, highlight either 'Use Map' or 'Find' and press
4. If you selected 'Use Map', use the
ENTER/MARK .
If you selected 'Find', select an item from the Find Menu as discussed in the "Finding an Item" section
found previously in this manual. Remember you can press the
open to fi nd an item near another location, such as the destination.
5. The new point is added to the route as displayed in the Add/Edit Vias Page. Continue steps 2 through
4 until you have added all of the vias that you want. Highlight 'Done' and press
apply the new vias to the route.
NAV/MOB key. The Navigate menu opens.
to select 'Edit Vias' and press
ENTER/MARK
to select the desired item on the map and press
ARROW KEYPAD
MENU
.
ENTER/MARK .
key while the Find Menu is
to
ENTER/MARK