Checking & Repairing Of Dvd Module P.c.b - Panasonic SCXH70 Service Manual

Step 6 Remove Ground Spring.
Step 7 Release 2 catches on Power Button P.C.B..
Step 8 Remove FL P.C.B., Volume Button P.C.B. and Power
Button P.C.B..
Step 9 Place DVD Mechanism Unit (DLS6E) onto bottom chas-
sis according to diagram shown.
Step 10 Screw 2 screws.
Step 11 Connect 17P FFC at the connector (CN203) on Main/
D-Amp P.C.B..
Step 12 Proceed to check and repair FL P.C.B..
Caution: Insulated material is required to insulate FL P.C.B.
from other parts.
10.4. Checking & Repairing of DVD
Module P.C.B.
• Follow (Step 1) to (Step 8) of Item 10.3.
10.4.1. Checking & Repairing of Side B of
DVD Module P.C.B.
Step 1 Remove Component Video P.C.B..
Step 2 Connect 7P FFC to the connector (FP8251) on DVD
Module P.C.B..
Step 3 Connect 24P FFC to the connector (FP8531) on DVD
Module P.C.B..
Step 4 Slightly move DVD Mechanism Unit (DLS6E) forward
according to diagram shown.
Caution: Insulated material is required to insulate DVD
Mechanism Unit (DLS6E) from other parts.
Step 5 Connect 11P FFC at the connector (CN4002) on Com-
ponent P.C.B..
Caution: Insulated material is required to insulate Compo-
nent Video P.C.B. from other parts.
Step 6 Proceed to check and repair Side B of DVD Module
P.C.B..
10.4.2. Checking & Repairing of Side A of
DVD Module P.C.B.
• Follow (Step 1) to (Step 5) of Item 10.4.1.
65