Caution: During assembling, ensure that Power Button
P.C.B. is properly located & fully catched onto Front Panel
with 3P cable dressed according to diagram shown.
8.18. Replacement
Assembly
• Follow (Step 1) to (Step 6) of Item 8.3.
• Follow (Step 1) to (Step 6) of Item 8.14.
Disassembly
8.18.1.
Assembly
Step 1 Open the DVD Lid Assembly in the direction of arrow,
until it is aligned parrallel with the Front Panel Assembly.
of
DVD
Lid
of
DVD
Lid
Step 2 Move the Shaft B of the DVD Lid Assembly in the direc-
tion of arrows (1) & (2).
Step 3 Lift the door spring at Shaft A in the direction of arrow.
58