Caution: During assembling, ensure that Voltage Selector
P.C.B. is properly inserted & fully catched onto Rear Panel.
Caution: During assembling, ensure that wires are prop-
erly dressed and tied together to prevent wires from touch-
ing any heated parts according to diagram shown.
8.6.
Disassembly of Rear Panel
• Follow (Step 1) to (Step 6) of Item 8.3.
• Follow (Step 1) to (Step 3) of Item 8.4.
• Follow (Step 1) to (Step 2) of Item 8.5.
Step 1 Remove 6 screws.
Step 2 Remove 1 screw.
Step 3 Release the tab of each side of the Rear Panel in the
direction of arrow.
Step 4 Remove Rear Panel.
8.7.
Disassembly of DVD Mecha-
nism Unit (DLS6E)
• Follow (Step 1) to (Step 6) of Item 8.3.
45