Adjusting Trim Angle - Yamaha F40 Owner's Manual

Operation
1. Trim operating angle
EMU27882

Adjusting trim angle

Power trim and tilt models
EWM00751
WARNING
Be sure all people are clear of the out-
G
board motor when adjusting the tilt an-
gle, also be careful not to pinch any
body parts between the drive unit and
clamp bracket.
Use caution when trying a trim position
G
for the first time. Increase speed gradu-
ally and watch for any signs of instabil-
ity or control problems. Improper trim
angle can cause loss of control.
If equipped with a power trim and tilt
G
switch located on the bottom cowling,
use the switch only when the boat is at
a complete stop with the engine off. Do
not adjust the trim angle with this
40
1
ZMU04059
switch while the boat is moving.
Adjust the outboard motor trim angle using
the power trim and tilt switch.
1. Power trim and tilt switch
1. Power trim and tilt switch
1. Power trim and tilt switch
To raise the bow (trim-out), press the switch
UP
DN
1
ZMU04060