from marine growth and corrosion which
could damage the power trim and tilt
mechanism.
EMU28041
Procedure for tilting down (manual
and hydro tilt models)
1.
Release the tilt lock lever.
2.
Hold the rear of the top cowling with one
hand, tilt the outboard motor up slightly
and pull out the tilt support knob or re-
turn the tilt support lever.
3.
Slowly tilt the outboard motor down.
4.
Place the tilt lock lever in the lock posi-
tion.
EMU28055
Procedure for tilting down (power
trim and tilt models / power tilt
models)
1.
Push the power trim and tilt switch / pow-
er tilt switch "
ZMU04069
motor is supported by the tilt rod and the
tilt support lever / tilt support knob be-
comes free.
2.
Release the tilt support lever or pull out
the tilt support knob.
ZMU04070
3.
Push the power trim and tilt switch / pow-
er tilt switch "
board motor to the desired position.
Operation
ZMU04071
" (up) until the outboard
ZMU04072
" (down) to lower the out-
45