Power Trim And Tilt / Power Tilt Will Not Operate; Starter Will Not Operate - Yamaha F40 Owner's Manual

Hide thumbs Also See for F40:
Table of Contents

Advertisement

Trouble Recovery
1. Fuse box
2. Fuse (20 A)
3. Spare fuse (20 A)
4. Fuse puller
1
1. Fuse puller
EMU29511
Power trim and tilt / power tilt will not
operate
If the engine cannot be tilted up or down with
the power trim and tilt / the power tilt because
of a discharged battery or a failure with the
power trim and tilt unit / the power tilt unit, the
engine can be tilted manually.
1.
Loosen the manual valve screw by turn-
ing it clockwise until it stops.
74
4
1
3
2
ZMU04094
ZMU04093
1. Manual valve screw
2.
Put the engine in the desired position,
then tighten the manual valve screw by
turning it counterclockwise.
EMU29532

Starter will not operate

If the starter mechanism does not operate
(the engine cannot be cranked with the start-
er), the engine can be started with an emer-
gency starter rope.
EWM01021
WARNING
Use this procedure only in an emergen-
G
cy to return to the nearest port for re-
pairs.
When the emergency starter rope is
G
used to start the engine, the start-in-
gear protection device does not oper-
ate. Make sure the remote control lever
is in neutral. Otherwise the boat could
unexpectedly start to move, which
could result in an accident.
Attach the engine stop switch lanyard
G
to a secure place on your clothing, or
your arm or leg while operating the
boat.
Do not attach the lanyard to clothing
G
that could tear loose. Do not route the
cord where it could become entangled,
1
ZMU04095

Hide quick links:

Advertisement

Table of Contents
loading

Table of Contents