Maintenance; Specifications - Yamaha F40 Owner's Manual

EMU31480

Specifications

NOTE:
"(AL)" stated in the specification data below
represents the numerical value for the alumi-
num propeller installed.
Likewise, "(SUS)" represents the value for
stainless steel propeller installed and "(PL)"
for plastic propeller installed.
EMU28218
Dimension:
Overall length:
F40MH 1332 mm (52.4 in)
F40TR 700 mm (27.6 in)
Overall width:
378 mm (14.9 in)
Overall height S:
1217 mm (47.9 in)
Overall height L:
1340 mm (52.8 in)
Transom height S:
410 mm (16.1 in)
Transom height L:
533 mm (21.0 in)
Weight (without propeller) S:
F40MH 83.0 kg (183 lb)
Weight (without propeller) L:
F40MH 87.0 kg (192 lb)
F40TR 89.0 kg (196 lb)
Performance:
Full throttle operating range:
5000–6000 r/min
Maximum output:
29.4 kW@5500 r/min (40 HP@5500
r/min)
Idling speed (in neutral):
850 ±50 r/min
Engine:
Type:
4-stroke L
Displacement:
3
747.0 cm (45.58 cu.in)
Bore × stroke:
65.0 × 75.0 mm (2.56 × 2.95 in)
Ignition system:
CDI
Spark plug with resistor (NGK):
DPR6EA-9
Spark plug gap:
0.8–0.9 mm (0.031–0.035 in)
Control system:
F40MH Tiller
F40TR Remote control
Starting system:
F40MH Manual
F40TR Electric
Starting carburetion system:
Prime start
Valve clearance (cold engine) IN:
0.15–0.25 mm (0.0059–0.0098 in)
Valve clearance (cold engine) EX:
0.25–0.35 mm (0.0098–0.0138 in)
Min. cold cranking amps (CCA/SAE):
F40TR 380.0 A
Min. marine cranking amps (MCA/ABYC):
F40TR 502.0 A
Min. reserve capacity (RC/SAE):
F40TR 124 minutes
Alternator output for battery DC:
15.0 A
Drive unit:
Gear positions:
Forward-neutral-reverse
Gear ratio:
2.00 (26/13)
Trim and tilt system:
F40MH Hydro tilt
F40TR Power trim and tilt
Propeller mark:
G
Fuel and oil:

Maintenance

49