Mmc: 105 Station Speed Dial - Samsung DCS Programming Manual

DCS
COMBINED PROGRAMMING MANUAL
MMC: 105
3 3
DCS
Allows the system administrator to program personal speed dial numbers for stations. This may
be particularly useful for single line telephones which are more difficult to program by the station
user. Each station can have up to five blocks of speed dials—each containing 10 numbers (giv-
ing a total of 50 numbers)—assigned to it in MMC 606, Assign Speed Block. By default, each sta-
tion has one block (for 10 numbers) assigned.
Speed dials are numbered 00–49. Each speed dial may contain a trunk or trunk group access
code (e.g. 9) followed by a separator (–) and up to 24 digits to be dialled. These dialled digits
can be 0–9, [ and #. If the system recognises a valid trunk or trunk group access number, it will
automatically insert the separator.
PROGRAM KEYS
UP & DOWN
KEYPAD
SOFT KEYS
SPEAKER
HOLD
"B"
"C"
"D"
"E"
"F"
Keys "A" to "F" are keys #19 to #24 on 24B keysets, or keys #7 to #12 on 12B keysets, or keys
#1 to #6 on 6B keysets.
ACTION
1. Open programming and select 105
Display shows
2. Dial station number (e.g. 205)
OR
Press UP or DOWN to select station and press RIGHT
soft key to move cursor
If selected station has no speed dial blocks assigned,
the display will be as shown and a new station may be
selected.
3. Enter speed dial number (e.g., 05)
OR
Press UP or DOWN to select location and press RIGHT
soft key to move cursor
4. Enter trunk access code (e.g., 9) followed by the
number to be dialled (e.g., 08104264100)
If you make an error, press the HOLD key to clear an
entire entry or use the DOWN key to move the cursor
back
STATION SPEED DIAL
3 3 3 3
CI CII
Used to scroll through options
Used to enter selections
Move cursor left and right
Used to store data and advance to next MMC
Used to clear previous entry
Used to insert a flash code "F"
Used to insert a pause code "P"
Used to insert a pulse/tone conversion code "C"
Used to mask/unmask following digits (shows as "[" or "]")
Used to enter name for speed dial bin (see MMC 106)
MMC 105 (Page 1 of 2)
3 3 3 3
816 408i
DISPLAY
[ 201] SPEED DIAL
00 :
[205] SPEED DIAL
00 :
[ 205] SPEED DIAL
NO SPEED BLOCK
[205] SPEED DIAL
05: _
[205] SPEED DIAL
05 : 9-08104264100_
MMC PROGRAMS
NOVEMBER 2001
3 3
408