Mmc: 700 Copy Cos Contents - Samsung DCS Programming Manual

DCS
COMBINED PROGRAMMING MANUAL
MMC: 700
3 3
DCS
Allows you to copy a selected class of service (COS) to another COS. This is useful, for example,
if you want to create a similar COS to that being copied but want to change a few selected op-
tions within that COS. This MMC allows you to enter MMC 701, Assign COS Contents, in order to
make any changes you require. If you want to create a completely new COS, use MMC 701.
PROGRAM KEYS
UP & DOWN
KEYPAD
SOFT KEYS
SPEAKER
"F"
ACTION
1. Open programming and select 700
Display shows
2. Dial selected COS to copy (e.g., 05)
OR
Press UP or DOWN key to select COS and press
RIGHT soft key to move cursor and advance to next
step
3. Dial target COS (e.g., 06)
OR
Press UP or DOWN key to select COS and press
RIGHT soft key to move cursor back to step 2
4. To make changes to COS options, press "F" key
to advance to MMC 701 (Assign COS Contents)
OR
Go to step 5 if no changes are required
5. Press TRSF to store and exit
OR
Press SPEAKER to store and advance to next MMC
Default Data:
Related Items:
COPY COS CONTENTS
3 3
CI CII
Used to scroll through options
Used to enter selections
Move cursor left and right
Used to store data and advance to next MMC
Key #24 (24B keyset) or key #12 (12B keyset) or key #6 (6B keyset)
is used to advance to MMC 701
None
MMC 701 Assign COS Contents
MMC 700 (Page 1 of 1)
3 3 3 3
816 408i
DISPLAY
COPY COS ITEMS
COS 01
COPY COS ITEMS
COS 05 COS 01
COPY COS ITEMS
COS 05 COS 06
COS CONTENTS(06)
TOLL LEVEL:A
MMC PROGRAMS
NOVEMBER 2001
3 3 3 3
408
COS 01