Mmc: 701 Assign Cos Contents - Samsung DCS Programming Manual

DCS
COMBINED PROGRAMMING MANUAL
MMC: 701
3 3
DCS
MMC 701 is used to create a new class of service (COS). If you want to make a copy of an exist-
ing COS, use MMC 700. If an 'unsupervised conference' feature is allowed, a programmed
CONF key must be available to allow reentry into a conference call.
For an overview of toll restriction (call barring), refer to Part 3 of this manual ( "Special Appli-
cations").
PROGRAM KEYS
UP & DOWN
KEYPAD
SOFT KEYS
SPEAKER
TOLL LEVEL OPTIONS
DIAL DIGIT
0
1
2
3
4
5
6
7
ACTION
1. Open programming and select 701
Display shows
2. Dial COS (e.g., 06)
OR
Press UP or DOWN key to select COS and press RIGHT
soft key to move cursor
3. Dial toll level (e.g. 2)
OR
Press UP or DOWN key to select option
4. Press RIGHT soft key to advance to COS options
Use tables and data below to set options
5. Press TRSF to store and exit
OR
Press SPEAKER to store and advance to next MMC
ASSIGN COS CONTENTS
3 3 3 3
CI CII
Used to scroll through options
Used to enter selections
Move cursor left and right
Used to store data and advance to next MMC
TOLL LEVEL
A
B
C
D
E
F
G
H
MMC 701 (Page 1 of 7)
3 3 3 3
816 408i
DISPLAY
COS CONTENTS(01)
TOLL LEVEL:A
COS CONTENTS(06)
TOLL LEVEL:A
COS CONTENTS(06)
TOLL LEVEL:C
COS CONTENTS(06)
000:AA CALER:YES
MMC PROGRAMS
NOVEMBER 2001
3 3
408